Lesson plan

universal lathe

A universal lathe or parallel lathe is the most common type of lathe. It differs from other types of lathes in that it has the option of a tailstock, separate mechanisms for longitudinal and transverse feeds (typically via separate handwheels), and an automatic (usually mechanically) driven longitudinal leadscrew for making threads.

Back to article

Article summary

A universal lathe or parallel lathe is the most common type of lathe. It differs from other types of lathes in that it has the option of a tailstock, separate mechanisms for longitudinal and transverse feeds (typically via separate handwheels), and an automatic (usually mechanically) driven longitudinal leadscrew for making threads.

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.