Universal Test Specification Language
Universal Test Specification Language (UTSL) is a programming language used to describe ASIC tests in a format that leads to an automated translation of the test specification into an executable test code.
≈ 2 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
Universal Test Specification Language (UTSL) is a programming language used to describe ASIC tests in a format that leads to an automated translation of the test specification into an executable test code. UTSL is platform independent and provided a code generation interface for a specific platform is available, UTSL code can be translated into the programming language of a specific Automatic Test Equipment (ATE).
UTSL contains high amount of commands and test-functions. It also allows the usage of commonly known high level programming language syntax elements such as "if/then/else" , etc. Flow control - "if/then/else, select/case" Loops - "for, while, for each" Data types - "int, double, bool, string" Numerical operators - "=, +, -, *, /, %, **, --, &, |, >" Logical operators - "==, , >=, Arrays - "declare, resize, and [] operator" Furthermore, specialized classes for testing were added: Pin and PinList classes - "for the test board specifics" TestEnvironment class - "wafer level vs final testing" SerialPort and SerialDataFrame classes - "for device serial communications" Evaluate class - "data-logs the results and compares the results to the defined limits" UTSL also supports the units and scales wherever floating point numbers are used.
This is essential for a language that describes a test program where the values can be returned as "V, mV, uV, A, mA, uA" , etc. Also more complex tests such as serial communications with ASIC that require write and/or read to and from register can be implemented using UTSL. The example below shows a test where a certain trim code is written to a register and based on the trim code the internal regulator steps in voltage which is read back (see the picture2).
Additionally, UTSL allows the user to define the state of the instrument i.e. connected to the pin, or disconnected from the pin.
Text derived from https://en.wikipedia.org/w/index.php?oldid=1366973074 under CC BY-SA 4.0; modifications have been made.