Upconverting nanoparticles

Uses your system voice; voice and rate in settings.

Snapshot

≈ 17 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

Upconverting nanoparticles (UCNPs) are nanoscale particles (diameter 1–100 nm) that exhibit photon upconversion. In photon upconversion, two or more incident photons of relatively low energy are absorbed and converted into one emitted photon with higher energy. Generally, absorption occurs in the infrared, while emission occurs in the visible or ultraviolet regions of the electromagnetic spectrum.

UCNPs are usually composed of rare-earth based lanthanide- or actinide-doped transition metals and are of particular interest for their applications in in vivo bio-imaging, bio-sensing, and nanomedicine because of their highly efficient cellular uptake and high optical penetrating power with little background noise in the deep tissue level. They also have potential applications in photovoltaics and security, such as infrared detection of hazardous materials.

Before 1959, the anti-Stokes shift was believed to describe all situations in which emitted photons have higher energies than the corresponding incident photons. An anti-Stokes shift occurs when a thermally excited ground state is electronically excited, leading to a shift of only a few k B T, where k B is the Boltzmann constant, and T is temperature. At room temperature, k B T is 25.7 meV. In 1959, Nicolaas Bloembergen proposed an energy diagram for crystals containing ionic impurities.…

Upconverting nanoparticles (UCNPs) are nanoscale particles (diameter 1–100 nm) that exhibit photon upconversion. In photon upconversion, two or more incident photons of relatively low energy are absorbed and converted into one emitted photon with higher energy. Generally, absorption occurs in the infrared, while emission occurs in the visible or ultraviolet regions of the electromagnetic spectrum.

UCNPs are usually composed of rare-earth based lanthanide- or actinide-doped transition metals and are of particular interest for their applications in in vivo bio-imaging, bio-sensing, and nanomedicine because of their highly efficient cellular uptake and high optical penetrating power with little background noise in the deep tissue level. They also have potential applications in photovoltaics and security, such as infrared detection of hazardous materials.

Before 1959, the anti-Stokes shift was believed to describe all situations in which emitted photons have higher energies than the corresponding incident photons. An anti-Stokes shift occurs when a thermally excited ground state is electronically excited, leading to a shift of only a few k B T, where k B is the Boltzmann constant, and T is temperature. At room temperature, k B T is 25.7 meV. In 1959, Nicolaas Bloembergen proposed an energy diagram for crystals containing ionic impurities.

Bloembergen described the system as having excited-state emissions with energy differences much greater than k B T, in contrast to the anti-Stokes shift. Advances in laser technology in the 1960s allowed the observation of non-linear optical effects such as upconversion. This led to the experimental discovery of photon upconversion in 1966 by François Auzel. Auzel showed that a photon of infrared light could be upconverted into a photon of visible light in ytterbium–erbium and ytterbium–thulium systems.

In a transition-metal lattice doped with rare-earth metals, an excited-state charge transfer exists between two excited ions. Auzel observed that this charge transfer allows an emission of photon with much higher energy than the corresponding absorbed photon. Thus, upconversion can occur through a stable and real excited state, supporting Bloembergen's earlier work. This result catapulted upconversion research in lattices doped with rare-earth metals.

One of the first examples of efficient lanthanide doping, the Yb/Er-doped fluoride lattice, was achieved in 1972 by Menyuk et al.

Synthesis

UCNP synthesis focuses on controlling several aspects of the nanoparticles – the size, shape, and phase. Control over each of these aspects may be achieved through different synthetic pathways, of which co-precipitation, hydro(solvo)thermal, and thermolysis are the most common. Different synthetic methods have different advantages and disadvantages, and the choice of synthesis must balance simplicity/ease of process, cost, and ability to achieve desired morphologies.

Generally, solid-state synthesis techniques are the easiest for controlling the composition of the nanoparticles, but not the size or surface chemistry. Liquid-based syntheses are efficient and typically better for the environment. The simplest and most economical method, in which components of the nanocrystal are mixed together in solution and allowed to precipitate. This method yields nanoparticles with a narrow size distribution (around 100 nm), but that lack the precision of more intricate methods, thereby requiring more post-synthesis work up.

NPs can be improved with an annealing step at high temperatures, but this often leads to aggregation, limiting applications. Common coprecipitation synthesized NPs include rare-earth-doped NaYF 4 nanoparticles prepared in the presence of ethylenediaminetetraacetic acid (EDTA) and LaYbEr prepared in NaF and organic phosphates (capping ligands). Hydro(solvo)thermal, also known as hydrothermal/solvothermal, methods are implemented in sealed containers at higher temperatures and pressures in an autoclave.

This method allows precise control over shape and size (monodisperse), but at the cost of long synthesis times and the inability to observe growth in real-time. More specialized techniques include sol-gel processing (hydrolysis and polycondensation of metal alkoxides), and combustion (flame) synthesis, which are rapid, non-solution phase pathways. Efforts to develop water-soluble and "green" total syntheses are also being explored, with the first of these methods implementing polyethylenimine (PEI)-coated nanoparticles.

Thermal decomposition uses high temperature solvents to decompose molecular precursors into nuclei, which grow at roughly the same rate, yielding high quality, monodisperse NPs. Growth is guided by precursor decomposition kinetics and Oswald ripening, allowing for fine control over particle size, shape and structure by temperature and reactant addition and identity.

Post-synthetic modification

As the size of the crystal decreases, the ratio of the surface area to volume increases dramatically, exposing dopant ions to being quenched due to effects of surface impurities, ligands, and solvents. Therefore, nano-sized particles are inferior to their bulk counterparts in upconversion efficiency. Experimental investigation reveals the dominant role of ligand in non-radiative relaxation process. There are several ways to increase the efficiencies of upconverting nanoparticles. This includes shell growth, ligand exchange and bilayer formation.

It has been shown that the introduction of an inert shell of a crystalline material around each doped NP serves as an effective way to isolate the core from the surrounding and surface deactivators, thus increasing upconverting efficiency. For example, 8 nm NaYF 4 Yb 3+ /Tm 3+ UCNPs coated with a 1.5 nm thick NaYF 4 shell, show 30-fold enhancement of the upconverting luminescence. The shell can be grown epitaxially using two general approaches: i) using molecular precursors; ii) using sacrificial particles (see Ostwald ripening).

Moreover, a critical thickness of the shell for the emission enhancement may exist that serves as a design factor. The molecular precursor of the shell material is mixed with the core particles in high-boiling solvents such as oleic acid and octadecene and the resultant mixture is heated to 300 °C to decompose the shell precursor. The shell tends to grow epitaxially on the core particles.

Since the host matrix of the core and the shell are of similar chemical composition (to achieve uniform epitaxial growth), there is no contrast difference between the corresponding TEM images before and after the shell growth. Consequently, the possibility of the alloy instead of the core–shell formation cannot be easily excluded. However, it is possible to distinguish between the two scenarios using X-ray photoelectron spectroscopy (XPS).

Ligand exchange

As-synthesized UCNPs are usually capped with organic ligands that aid in size and shape control during preparation. These ligands make their surface hydrophobic and hence are not dispersible in aqueous solution, preventing their biological applications. One simple method to increase solubility in aqueous solvents is direct ligand exchange. This requires a more favored ligand to replace the initial ones.

The hydrophobic native ligand capping the NP during synthesis (usually a long chain molecule like oleic acid) is directly substituted with a more polar hydrophilic one, which are usually multi-chelating (e.g. polyethylene glycol (PEG)-phosphate, polyacrylic acid) and hence provides better stabilization and binding, resulting in their exchange. A shortcoming of this method is the slow kinetics associated with the exchange. Generally the new ligand is also functionalized with a group like thiol that allows for facile binding to the NP surface.

The protocol for direct exchange is simple, generally involving mixing for an extended period of time, but the work-up can be tedious, conditions must be optimized for each system, and aggregation may occur. However the two-step process of ligand exchange involves the removal of original ligands followed by coating hydrophilic ones, which is a better method. The ligand removal step here was reported through various ways. A simple way was wash the particles with ethanol under ultrasonic treatment.

Reagents like nitrosonium tetrafluoroborate or acids are used to strip the native ligands off of the NP surface to attach favorable ones later on. This method shows less tendency for NP aggregation than the direct exchange, and can be generalized to other types of nanoparticles.

Formation of bilayer

Another method involves coating the UCNP in long amphiphilic alkyl chains to create a pseudo bilayer. The hydrophobic tails of the amphiphiles are inserted in between the oleate ligands on the surface of the NP, leaving the hydrophilic heads to face outwards. Phospholipids have been used for this purpose with great success, as they are readily engulfed by biological cells Using this strategy, surface charge is easily controlled by choosing the second layer and some functionalized molecules can be loaded to the outer layer. Both surface charge and surface functional groups are important in bioactivity of nanoparticles. A cheaper strategy for making lipid bilayer coating is to use amphiphilic polymers instead of amphiphilic molecules.

Bioimaging

Bioimaging with UCNPs involves using a laser to excite the UCNPs within a sample and then detecting the emitted, frequency-doubled light. UCNPs are advantageous for imaging due to their narrow emission spectra, high chemical stability, low toxicity, weak autofluorescence background, long luminescence lifetime, and high resistance to photoquenching and photobleaching.

In comparison to traditional biolabels, which use Stokes-shift processes and require high photon energies, UCNPs utilize an anti-Stokes mechanism that allows for the use of lower energy, less damaging and more deeply penetrating light. Multimodal imaging agents combine multiple modes of signal reporting. UCNPs with Gd 3+ or Fe 2 O 3 can serve as luminescent probes and MRI contrast agents.

UCNPs are also used in the configuration of photoluminescence and X-ray computed tomography (CT), and trimodal UCNPs combining photoluminescence, X-ray CT, and MRI have also been prepared. By taking advantage of the attractive interaction between fluoride and lanthanide ions, UCNPs can be used as imaging agents based on single-photon emission computed tomography (SPECT), helping to image lymph nodes and to assist in staging for cancer surgery.

UCNPs as targeted fluorophores and conjugated with ligands form over-expressed receptors on malignant cells, serving as a photoluminescence label to selectively image cells. UCNPs have also been used in functional imaging, such as the targeting of lymph nodes and the vascular system to assist in cancer surgeries. UCNPs enable multiplexed imaging by dopant modulation, shifting emission peaks to wavelengths that can be resolved.

Single-band UCNPs conjugated to antibodies are used in detecting breast cancer cells, surpassing traditional fluorophore labeling of antibodies, which is not amenable to multiplexed analysis.

Biosensors and temperature sensors

It is utilizing photoinduced electron transfer mechanism. UCNPs have been used as nanothermometers to detect intracellular temperature differences. (NaYF 4 : 20% Yb 3+ , 2% Er 3+ ) @NaYF 4 core–shell structured hexagonal nanoparticles can measure temperatures in the physiological range (25 °C to 45 °C) with less than 0.5 °C precision in HeLa cells. UNCPs can be made much more versatile biosensors by combining them with recognition elements like enzymes or antibodies. Intracellular glutathione was detected using UCNPs modified with MnO 2 nanosheets.

MnO 2 nanosheets quench UCNP luminescence, and glutathione was observed to selectively restore this luminescence through reduction of MnO 2 to Mn 2+ . NaYF 4 : Yb 3+ /Tm 3+ nanoparticles with SYBR Green I dye can probe Hg 2+ in vitro with a detection limit of 0.06 nM. Hg 2+ and other heavy metals have been measured in live cells. The tunable and multiplexed emissions allow for the simultaneous detection of different species.

Drug release and delivery

There are three ways to construct UCNP-based drug delivery systems. First, UCNPs can transport hydrophobic drugs, like doxorubicin, by encapsulating them on the particle surface, the hydrophobic pocket. The drug can be released by a pH change. Second, mesoporous silica coated UCNPs can be used, where drugs can be stored and released from the porous surface. Thirdly, the drug can be encapsulated and transferred in a hollow UCNP shell. Light-activated processes that deliver or activate medicine are known as photodynamic therapeutic (PDT).

Many photoactive compounds, are triggered by UV light, which has smaller penetration depth and causes more tissue damage compared with IR light. UCNPs can be used to locally trigger UV-activated compounds when irradiated with benign IR irradiation. For instance, UCNPs can absorb IR light and emit visible light to trigger a photosensitizer, which can produce highly reactive singlet oxygen to destroy tumor cells. This non-toxic and effective approach has been demonstrated both in vitro and in vivo.

Similarly, UCNPs can be used in photothermal therapy, which destroys targets by heat. In UCNP-plasmonic nanoparticle composites (e.g. NaYF 4 :Yb Er@Fe 3 O 4 @Au 17 ), the UCNPs target tumor cells and the plasmonic nanoparticles generate heat to kill cancer cells. [Field] nanoparticles generate heat to kill cancer cells.

Solar Cells

UCNPs have been integrated into solar panels to broaden the spectrum of sunlight that can be captured and converted into electricity. The maximum output of a solar cell is dictated in part by the fraction of incident photons captured to promote electrons. Solar cells can only absorb and convert photons with energy equal to or greater than the bandgap. Any incident photon with energy smaller than the bandgap is lost.

For an ideal single-junction solar cell with a bandgap of 1.34 eV, only 33.17% of incident sunlight can be absorbed, also known as the Shockley–Queisser limit. UCNPs can capture this wasted sunlight by combining multiple low energy IR photons into a single high energy photon. The emitted photon will have sufficient energy to promote charge carriers across the band gap. UCNPs can be integrated into solar cell systems of a number of different classes and in multiple forms.

For example, UCNPs can be laminated onto the back sides of semiconductors as a film, to collect low energy light and upconvert it. Such a treatment generated a 37% efficiency for upconverted light. Another strategy is to disperse the nanoparticles throughout a highly porous material. In one device architecture, UCNPs are infiltrated into a titania micro-scaffold. More titania is added to embed the UCNPs, UCNPs have also been used in dye-sensitized cells.

Additionally, UCNPs can be utilized in perovskite solar cells (PSCs) to significantly enhance their efficiency. There are various UCNP parameters that need to be controlled to optimize solar cell performance. To optimize the UCNPs' solar efficiency enhancement, it is crucial to regulate the size and shape of the nanoparticles, the dopant and host lattice identity, and the concentration of dopants. The host lattice needs to be chemically robust enough to withstand synthesis.

The system parameters that affect these UCNP properties include temperature, pressure, capping ligand, precursor composition, heating rate, cooling rate, reaction time, solvent, and reagent concentrations. To commercialize UCNP applications in solar cells, their synthesis needs to be scalable. Although various UCNP structures are optimal for different applications, for solar cells, one of the most suitable and scalable UCNP structures is core-shell nanoparticles.

Commonly, nanoparticle synthesis is upscaled using flow reactors, microfluidics, or batch production. However, for the more precise synthesis methods, namely hydro(solvo)thermal and thermolysis, a temperature greater than 300℃ is required, making flow reactors and microfluidics incompatible for high-quality large-scale UCNP synthesis. Thus, batch producing core-shell nanoparticles to synthesize functional UCNPs at a large scale for solar cell applications is the most optimal method.

Photoswitching

Photoswitching is the conversion from one chemical isomer to another triggered by light. Photoswitching finds use in optical data processing and storage and in photorelease. Photorelease is the use of light to induce a moiety attached to the nanoparticle surface to detach. UCNPs of lanthanide-doped NaYF 4 have been applied as remote control photoswitches. UCNPs are useful photoswitches because they can be irradiated with low-cost NIR radiation and convert it into UV radiation extremely locally.

Photocatalytic systems can be enhanced with UCNPs by the same principle as solar cells. In titania coated with YF 3 :Yb/Tm UCNPs, degradation of pollutants was observed under NIR radiation. Normally low-energy NIR radiation cannot induce photocatalysis in titania, which has a band gap in the UV range. The excitation in titania results in a surface redox reaction which decomposes compounds near the surface. UCNPs enable cheap low-energy NIR photons to replace expensive UV photons.

In biological contexts UV light is highly absorbed and causes tissue damage. However NIR is weakly absorbed and induces UCNP behavior in vivo. Core-shell UCNPs were used to initiate the photocleavage of a ruthenium complex using an intensity of NIR light that is completely safe in biomedical use. UCNP-based systems can couple both light-based techniques and current-based techniques. This optical stimulation of semiconductors is then coupled with voltage-based stimulation in order to store information.

Other advantages of utilizing UCNPs for flash drives include that all materials employed are photo- and thermally stable. Furthermore, imperfections in the UCNP film will not affect data storage. These advantages yielded an impressive achieved storage limit, making UCNP films a promising material in optical storage. UCNPs can be applied in niche applications for displays and printing. Anti-counterfeiting codes or prints can be fabricated using UCNPs in existing colloidal ink preparations.

Flexible, transparent displays have also been fabricated using UCNPs. New security inks which incorporate lanthanide doped upconverting nanoparticles have many advantages. Also, these inks are invisible until subjected to NIR light. Red, green and blue upconverting inks have been achieved. The color produced from some overlapped ink depends on the power density of the NIR excitation, which enables the incorporation of additional security features. The use of upconverting nanoparticles in fingerprinting is highly selective.

The upconverting nanoparticles can bind to lysozyme in sweat that is deposited when a fingertip touches a surface. Also, a cocaine-specific aptamer is developed to identify cocaine-laced fingerprints by the same method. Upconverting nanoparticles can also be used for barcoding. These micro-barcodes can be embedded onto various objects. The barcodes are seen under NIR illumination and can be imaged using an iPhone camera and a microscope objective.

References

Text derived from https://en.wikipedia.org/w/index.php?oldid=1375390671 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

23 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.