USB4
≈ 10 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
Universal Serial Bus 4 (USB4), sometimes erroneously referred to as USB 4.0, is the most recent technical specification of the USB (Universal Serial Bus) data communication standard. The USB Implementers Forum announced USB4 in 2019. USB4 enables multiple devices to dynamically share a single high-speed data link. USB4 defines signaling rates of 20 Gbit/s, 40 Gbit/s and 80 Gbit/s. USB4 is only defined for USB-C connectors, and its Type-C specification regulates the connector, cables, and basic power delivery features across all uses of USB-C cables, enhanced with the USB Power Delivery specification. The USB4 standard mandates "functionality backward compatibility" to USB 3.x and dedicated backward compatibility with USB 2.0. The dynamic sharing of bandwidth of a USB4 connection is achieved by encapsulating multiple virtual connections ("tunnels") of other protocols, such as USB 3.x, HDMI, DisplayPort and PCI Express. USB4 is based on the Thunderbolt 3 protocol. However, it is different enough that backward compatibility to Thunderbolt 3 is optional for many device types.
Universal Serial Bus 4 (USB4), sometimes erroneously referred to as USB 4.0, is the most recent technical specification of the USB (Universal Serial Bus) data communication standard. The USB Implementers Forum announced USB4 in 2019. USB4 enables multiple devices to dynamically share a single high-speed data link. USB4 defines signaling rates of 20 Gbit/s, 40 Gbit/s and 80 Gbit/s. USB4 is only defined for USB-C connectors, and its Type-C specification regulates the connector, cables, and basic power delivery features across all uses of USB-C cables, enhanced with the USB Power Delivery specification. The USB4 standard mandates "functionality backward compatibility" to USB 3.x and dedicated backward compatibility with USB 2.0. The dynamic sharing of bandwidth of a USB4 connection is achieved by encapsulating multiple virtual connections ("tunnels") of other protocols, such as USB 3.x, HDMI, DisplayPort and PCI Express. USB4 is based on the Thunderbolt 3 protocol. However, it is different enough that backward compatibility to Thunderbolt 3 is optional for many device types.
History
Prior to USB4, Thunderbolt provided a way to dynamically share bandwidth between multiple DisplayPort and PCIe connections over a single cable. Thunderbolt originally used the Mini DisplayPort connector and was only backward compatible to DisplayPort connections and did not support power transfer. The introduction of the USB Type-C connector in 2014 provided a connector that could support USB data connectivity and power transfer as well as connections. It also allowed the static sharing of bandwidth between DP and USB connections over the same cable. Thunderbolt 3 switched over to using the new Type-C connector and also added backward compatibility for USB connections and power transfer features.
USB4 Version 1.0
USB4 was announced in March 2019 by the USB Promoter Group. The version 1.0 of the USB4 specification, released 29 August 2019, is titled "Universal Serial Bus 4 (USB4™)". Several news reports before the release of that version sometimes use the wrong terminology "USB 4.0" and "USB 4". In the announcement press release, the USB Promoter Group mentions that USB4 is "based on the Thunderbolt™ protocol specification recently contributed by Intel Corporation". Goals stated in the USB4 specification are increasing bandwidth, helping to converge the USB-C connector ecosystem, and "minimize end-user confusion". Some of the key areas to achieve this are using a single USB-C connector type, to offer display and data transfer features, while retaining "compatibility with existing and Thunderbolt products". Version 1.0 defined 20 Gbit/s and 40 Gbit/s connections, the required support of USB 2.0 and USB 3.x connections at up to 10 Gbit/s with support for tunneling connections according to the PCIe 4.0, USB 3.2, and DP 1.4a specifications. Optional backward compatibility to Thunderbolt 3 as well as Host-to-Host networking were also defined. Compared to Thunderbolt 3, USB4 changed the raw bit rates slightly to bring them in line with other USB specifications, where the nominal bit rate matches the raw bit rate. USB4 also added support for USB3 tunnels and use of the USB2 wires for improved backward compatibility with previous USB standards and to allow for simpler USB4 devices without support for PCIe. USB4 also added support for hub topologies compared to Thunderbolt's previous restriction to daisy-chaining topology. In July 2020 Intel announced Thunderbolt 4 as an implementation of USB4 40 Gbit/s with additional requirements, such as mandatory backward compatibility to Thunderbolt 3 and requirement for smaller notebooks to support being charged over Thunderbolt 4 ports. Publications such as AnandTech described Thunderbolt 4 as "superset of TB3 and USB4" and "able to accept TB4, TB3, USB4, and USB 3/2/1 connections". Intel itself describes Thunderbolt 4 as "delivering increased minimum performance requirements, expanded capabilities and USB4 specification compliance" and as building "on the innovation of Thunderbolt 3".
USB4 Version 2.0
On 18 October 20221 the USB Promoter Group released the USB4 Version 2.0 specification. It added a new transmission speed that allows 80 Gbit/s symmetric connections or asymmetric connections supporting 120 Gbit/s in one direction and 40 Gbit/s in the other. The new PAM3 encoding scheme enables this over existing, passive USB 40Gbps cables. Active cables are not forward compatible in the same way, instead a new speed grade of active cables was added. It also upgraded the support of DP tunnels to DP 2.1, allowing the tunneling of DP connections with up to 80 Gbit/s (UHBR20). It also added a replacement of the previous tunneling of classic USB 3.2 connection speeds with "USB3 Gen T tunneling", which can exceed 20 Gbit/s and also removed PCIe overhead limitations. Around the release of the new USB4 2.0 specification, USB-IF also mandated new logos and marketing names to simplify representing the maximum supported bit rates and wattages to consumers. In September 2023, Intel announced the launch of Thunderbolt 5 as an implementation of USB4, using the new abilities of 80 Gbit/s connections and updated DP support Intel's own press release describes it as "built on industry standards – including USB4 V2".
Cable compatibility
The Type-C standard supports cable backward/downward compatibility in many situations. The compatibility typically only breaks between the different families of standards (USB 2.0, USB 3.2, USB4). There are "passive" cables, which consist mainly of plain conductors that can be used and repurposed for any manner of signals in either direction and thus have the highest forward and backward compatibility. It also contains active or hybrid active (mix of active-conductive and optical) cables which the standard mandates to have vast backward compatibility support, so as to behave as if they were regular, passive cables in the eyes of the consumer. But forward compatibility is limited for active cables due the active electronics inside. Only optically isolated active cables (OIAC), which should be clearly distinguishable by price, design, cable thickness, and advertising, are allowed to strip most of the backward compatibility away. The Gen 4 transmission mode with PAM-3 uses signalling very different from that of previous modes. Every active component needs to explicitly support this new signaling, but it stays within all signal quality requirements of existing, passive Gen 3 cables (USB4 and TB3). The direction of signalling also poses another challenge to active cables. Most USB signalling uses predefined wire-pairs for sending and others for receiving. But alternate modes, such as DP Alt mode may require to use all of the wire-pairs in the same direction. This switching of the direction of wire pairs makes active cables more complicated and therefore support for it is optional.
Software support
USB4 is supported by: Linux kernel 5.6, released on 29 March 2020 macOS Big Sur (11.0), released on 12 November 2020 Windows 11, released with support for USB4 Version 1.0 on 5 October 2021 upgraded to USB4 Version 2.0 support including 80 Gbit/s around March 2024
Hardware support
Brad Saunders, CEO of the USB Promoter Group, anticipates that most PCs with USB4 will support Thunderbolt 3, but for phones the manufacturers are less likely to implement Thunderbolt 3 support. On 3 March 2020, Cypress Semiconductor announced new Type-C power (PD) controllers supporting USB4, CCG6DF as dual port and CCG6SF as single port. In November 2020, Apple unveiled MacBook Air (M1, 2020), MacBook Pro (13-inch, M1, 2020) and Mac mini (M1, 2020), featuring two USB 40Gbps (USB4 Gen 3) ports. AMD also stated that Zen 3+ (Rembrandt) processors will support USB4 and released products do have this feature after a chipset driver update. However, AMD has only announced support for USB 20Gbps (USB 3.2 Gen 2×2) in Zen 4 processors that were released in September 2022. Intel supported Thunderbolt 3 and USB-C with their 8th generation mobile processors in 2018. For example, the Lenovo P52 has dual TB3 ports on the rear. TB/USB has evolved as Intel is able to refine logic design.
Known USB4 controllers
The following table of USB4 controllers lists what features the controllers could support. The boards or products in which they are used can often influence the specific supported features, for example by not connecting all inputs, configuring the controller differently for compatibility or power saving or by combining it with other, lower tier components. For example, many USB4 controllers Intel builds into their CPUs require further external components such as ReTimers to reach the full 40 Gbit/s speeds. They can also be used in simpler configurations for only 20 Gbit/s. Features of alternate connections, such as the native DP or USB3 speeds - which can differ from the speeds supported for DP and USB3 tunnels inside USB4 connections - may also depend on other components, such as the ReTimers used.
References
Specification References
External links
USB4 | USB-IF USB4 Taxonomy | USB-IF Current USB specifications Podcast with Jit Lim from Keysight, 2019-11-21
Text derived from https://en.wikipedia.org/w/index.php?oldid=1369355634 under CC BY-SA 4.0; modifications have been made.
References
2 claims could not be tied to a specific sentence and are listed in the table below instead.
- ↩Wikipedia “USB4” release date (×1) · confidence 0.95 revision URL