UWB ranging

Ultra-wideband impulse radio ranging (or UWB-IR ranging) is a Wireless positioning technology based on IEEE 802.15.4z standard, which is a wireless communication protocol introduced by IEEE, for systems operating in unlicensed spectrum…

Uses your system voice; voice and rate in settings.

Snapshot

≈ 4 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

Ultra-wideband impulse radio ranging (or UWB-IR ranging) is a Wireless positioning technology based on IEEE 802.15.4z standard, which is a wireless communication protocol introduced by IEEE, for systems operating in unlicensed spectrum, equipped with extremely large bandwidth transceivers. UWB enables very accurate ranging (in the order of centimeters) without introducing significant interference with narrowband systems.

To achieve these stringent requirements, UWB-IR systems exploit the available bandwidth (which exceeds 500 MHz for systems compliant to IEEE 802.15.4z protocol) that they support, which guarantees very accurate timing (and thus ranging) and robustness against multipath, especially in indoor environments. The available bandwidth also enables UWB systems to spread the signal power over a large spectrum (this technology is thus called spread spectrum ), avoiding narrowband interference.

Ultra-wideband impulse radio ranging (or UWB-IR ranging) is a Wireless positioning technology based on IEEE 802.15.4z standard, which is a wireless communication protocol introduced by IEEE, for systems operating in unlicensed spectrum, equipped with extremely large bandwidth transceivers. UWB enables very accurate ranging (in the order of centimeters) without introducing significant interference with narrowband systems.

To achieve these stringent requirements, UWB-IR systems exploit the available bandwidth (which exceeds 500 MHz for systems compliant to IEEE 802.15.4z protocol) that they support, which guarantees very accurate timing (and thus ranging) and robustness against multipath, especially in indoor environments. The available bandwidth also enables UWB systems to spread the signal power over a large spectrum (this technology is thus called spread spectrum ), avoiding narrowband interference.

The chip rate is f_c = 500 MHz or, alternatively, the chip time is T_c = 2 ns. Each chip is modulated by the same pulse waveform. The pulse waveform is not specified by the protocol, thus it is left to user preference.

However the spectrum of the pulses must be entirely contained in the allowed channels. x(t) = \sum_{k,n} c_{kn} \cdot p \big( t - n L T_c - k N_{\mathrm{cps}} T_c \big) where the parameters are defined as shown here below c_{kn} \in \{ 0, \pm1 \} . p (t) is the pulse shape. L is the spreading factor. N_{\mathrm{cps}} is the number of chips per symbol.

T_c is the chip time. The received SHR waveform can instead be described as y(t) = \sum_{k,n,\ell} \alpha_\ell \cdot c_{kn} \cdot p \big( t - n L T_c - k N_{\mathrm{cps}} T_c -\tau_\ell \big) + w(t) where the additional parameters are defined as follows \alpha_\ell and \tau_\ell are the complex channel gain and the propagation delay associated to the \ell^{th} path. w(t) is the noise waveform, which is usually described as AWGN.

In order to associate the propagation delay to a distance, there must exist a LoS path between transmitter and receiver or, alternatively, a detailed map of the environment has to be known in order to perform localization based on the reflected rays. In presence of multipath, the large bandwidth is of paramount importance to distinguish all the replicas, which otherwise would significantly overlap at receiver side, especially in indoor environments. \hat{r} = c\cdot \hat{\tau} where \hat{\tau} refers to the LoS path estimated delay.

The second method is based on the round-trip time (RTT) and it is called two-way ranging. It consists in the following procedure: The first anchor transmits a data frame The second anchor receives the frame and waits for a fixed amount of time T After waiting for a time T , the second anchor transmits the acknowledgment frame The first anchor receives the acknowledgment frame and estimates the delay accumulated since the transmission of the initial data frame In this second case the distance between the 2 anchors can be computed as \hat{r} = \frac{1}{2} \cdot c \cdot ( \hat{\tau} - T) Also in this case \hat{\tau} refers to the LoS path estimated delay.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1378303598 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

No external citation was extracted for this revision. That is a statement about the source, not a claim that none exists.