Lesson plan

variables sampling plan

In statistics, a variables sampling plan is an acceptance sampling technique. Plans for variables are intended for quality characteristics that are measured on a continuous scale. This plan requires the knowledge of the statistical model (e.g. normal distribution). The historical evolution of this technique dates back to the seminal work of W. Allen Wallis (1943). The purpose of a plan for variables is to assess whether the process is operating far enough from the specification limit. Plans for variables may produce a similar OC curve to attribute plans with significantly less sample size. The decision criterion of these plans are : \bar{X}+ k\sigma \leqslant USL or \bar{X}- k\sigma \geqslant LSL where \bar{X} and \sigma are the sample mean and the standard deviation respectively, k is the critical distance, USL and LSL are the upper and lower regulatory limits. When the above expression is satisfied the proportion nonconforming is lower than expected and therefore the lot is accepted. A variables sampling plan can be designed so that the OC curve passes through two points (AQL, \alpha ) and (LQL, \beta ). AQL and LQL are the Acceptable quality limit and the limiting quality level respectively. \alpha and \beta are the producer and consumer's risks.…

Back to article

Article summary

In statistics, a variables sampling plan is an acceptance sampling technique. Plans for variables are intended for quality characteristics that are measured on a continuous scale. This plan requires the knowledge of the statistical model (e.g. normal distribution). The historical evolution of this technique dates back to the seminal work of W. Allen Wallis (1943). The purpose of a plan for variables is to assess whether the process is operating far enough from the specification limit. Plans for variables may produce a similar OC curve to attribute plans with significantly less sample size. The decision criterion of these plans are : \bar{X}+ k\sigma \leqslant USL or \bar{X}- k\sigma \geqslant LSL where \bar{X} and \sigma are the sample mean and the standard deviation respectively, k is the critical distance, USL and LSL are the upper and lower regulatory limits. When the above expression is satisfied the proportion nonconforming is lower than expected and therefore the lot is accepted. A variables sampling plan can be designed so that the OC curve passes through two points (AQL, \alpha ) and (LQL, \beta ). AQL and LQL are the Acceptable quality limit and the limiting quality level respectively. \alpha and \beta are the producer and consumer's risks.…

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.