{
  "id": "velocity-195839-c6348bb06fe4b82a",
  "slug": "velocity",
  "title": "Velocity",
  "qid": "Q1673215",
  "lead": "Velocity is a measurement of speed in a certain direction of motion. It is a fundamental concept in kinematics, the branch of classical mechanics that describes the motion of physical objects. Velocity is a vector quantity, meaning that both magnitude and direction are needed to define it (velocity vector). The scalar absolute value (magnitude) of velocity is called speed, a quantity that is measured in metres per second (m/s or m⋅s −1 ) in the SI (International System of Units) system. For example, \"5 metres per second\" is a scalar, whereas \"5 metres per second east\" is a vector. If there is a change in speed, direction or both, then the object is said to be undergoing an acceleration.",
  "body": "Velocity is a measurement of speed in a certain direction of motion. It is a fundamental concept in kinematics, the branch of classical mechanics that describes the motion of physical objects. Velocity is a vector quantity, meaning that both magnitude and direction are needed to define it (velocity vector). The scalar absolute value (magnitude) of velocity is called speed, a quantity that is measured in metres per second (m/s or m⋅s −1 ) in the SI (International System of Units) system. For example, \"5 metres per second\" is a scalar, whereas \"5 metres per second east\" is a vector. If there is a change in speed, direction or both, then the object is said to be undergoing an acceleration. \\bar{v}=\\frac{\\Delta s}{\\Delta t}. \\boldsymbol{v} = \\lim_{{\\Delta t}\\to 0} \\frac{\\Delta \\boldsymbol{s}}{\\Delta t} = \\frac{d\\boldsymbol{s}}{dt} . From this derivative equation, in the one-dimensional case it can be seen that the area under a velocity vs. time ( vs. graph) is the displacement, . In calculus terms, the integral of the velocity function is the displacement function . In the figure, this corresponds to the yellow area under the curve. \\boldsymbol{s} = \\int \\boldsymbol{v} \\ dt . Although the concept of an instantaneous velocity might at first seem counter-intuitive, it may be thought of as the velocity that the object would continue to travel at if it stopped accelerating at that moment. ==Equation of motion== ===Average velocity=== Velocity is defined as the rate of change of position with respect to time, which may also be referred to as the instantaneous velocity to emphasize the distinction from the average velocity. In some applications the average velocity of an object might be needed, that is to say, the constant velocity that would provide the same resultant displacement as a variable velocity in the same time interval, , over some time period . Average velocity can be calculated as: \\mathbf{\\bar{v}} = \\frac{\\Delta\\mathbf{x}}{\\Delta t} = \\frac{\\int_{t_0}^{t_1} \\mathbf{v}(t)\\, dt}{t_1-t_0}. The average velocity is always less than or equal to the average speed of an object. This can be seen by realizing that while distance is always strictly increasing, displacement can increase or decrease in magnitude as well as change direction. In terms of a displacement-time ( vs. ) graph, the instantaneous velocity (or, simply, velocity) can be thought of as the slope of the tangent line to the curve at any point, and the average velocity as the slope of the secant line between two points with coordinates equal to the boundaries of the time period for the average velocity. ====Special cases==== When a particle moves with different uniform speeds v 1 , v 2 , v 3 , ..., v n in different time intervals t 1 , t 2 , t 3 , ..., t n respectively, then average speed over the total time of journey is given as \\bar{v} = \\frac{v_1 t_1+ v_2 t_2+ v_3 t_3+ \\dots+ v_n t_n}{ t_1+ t_2+ t_3+ \\dots + t_n} If , then average speed is given by the arithmetic mean of the speeds \\bar{v} = \\frac{v_1+v_2+v_3+\\dots+v_n}{n} = \\frac{1}{n}\\sum_{i=1}^n{v_i} When a particle moves different distances s 1 , s 2 , s 3 ,..., s n with speeds v 1 , v 2 , v 3 ,..., v n respectively, then the average speed of the particle over the total distance is given as \\bar{v} ={s_1+s_2+s_3+\\dots+s_n\\over t_1+t_2+t_3+\\dots+t_n}={{s_1+s_2+s_3+\\dots+s_n}\\over {{s_1\\over v_1}+{s_2\\over v_2}+ {s_3\\over v_3}+\\dots+{s_n\\over v_n}}} If , then average speed is given by the harmonic mean of the speeds \\bar{v} = n\\left({1\\over v_1} + {1\\over v_2} + {1\\over v_3} + \\dots + {1\\over v_n}\\right)^{-1} =n\\left(\\sum_{i=1}^n\\frac{1}{v_i}\\right)^{-1}. ===Relationship to acceleration=== Although velocity is defined as the rate of change of position, it is often common to start with an expression for an object's acceleration. As seen by the three green tangent lines in the figure, an object's instantaneous acceleration at a point in time is the slope of the line tangent to the curve of a graph at that point. In other words, instantaneous acceleration is defined as the derivative of velocity with respect to time: \\boldsymbol{a} = \\frac{d\\boldsymbol{v}}{dt} . From there, velocity is expressed as the area under an acceleration vs. time graph. As above, this is done using the concept of the integral: \\boldsymbol{v} = \\int \\boldsymbol{a} \\ dt . ====Constant acceleration==== In the special case of constant acceleration, velocity can be studied using the suvat equations. By considering a as being equal to some arbitrary constant vector, this shows \\boldsymbol{v} = \\boldsymbol{u} + \\boldsymbol{a}t with as the velocity at time and as the velocity at time . By combining this equation with the suvat equation , it is possible to relate the displacement and the average velocity by \\boldsymbol{x} = \\frac{(\\boldsymbol{u} + \\boldsymbol{v})}{2} t = \\boldsymbol{\\bar{v}}t. It is also possible to derive an expression for the velocity independent of time, known as the Torricelli equation, as follows: \\begin{align} v^2 = \\boldsymbol{v}\\cdot\\boldsymbol{v} &= (\\boldsymbol{u}+\\boldsymbol{a}t) \\cdot (\\boldsymbol{u}+\\boldsymbol{a}t) \\\\ &= u^{2} + 2t(\\boldsymbol{a}\\cdot\\boldsymbol{u})+a^{2}t^{2} \\end{align} \\begin{align} (2\\boldsymbol{a})\\cdot\\boldsymbol{x} &= (2\\boldsymbol{a}) \\cdot \\left(\\boldsymbol{u}t + \\tfrac{1}{2} \\boldsymbol{a} t^2\\right) \\\\[1ex] &= 2t (\\boldsymbol{a} \\cdot \\boldsymbol{u}) + a^2 t^2 = v^{2} - u^{2} \\end{align} \\therefore v^2 = u^2 + 2(\\boldsymbol{a}\\cdot\\boldsymbol{x}) where etc. The above equations are valid for both Newtonian mechanics and special relativity. Where Newtonian mechanics and special relativity differ is in how different observers would describe the same situation. In particular, in Newtonian mechanics, all observers agree on the value of t and the transformation rules for position create a situation in which all non-accelerating observers would describe the acceleration of an object with the same values. Neither is true for special relativity. In other words, only relative velocity can be calculated. In classical mechanics, Newton's second law defines momentum, p, as a vector that is the product of an object's mass and velocity, given mathematically as \\boldsymbol{p} = m\\boldsymbol{v} where m is the mass of the object. The kinetic energy of a moving object is dependent on its velocity and is given by the equation E_{\\text{k}} = \\tfrac{1}{2} m v^2 where E k is the kinetic energy. Kinetic energy is a scalar quantity as it depends on the square of the velocity. In fluid dynamics, drag is a force acting opposite to the relative motion of any object moving with respect to a surrounding fluid. The drag force, F_D , is dependent on the square of velocity and is given as F_D\\, =\\, \\tfrac12\\, \\rho\\, v^2\\, C_D\\, A where \\rho is the density of the fluid, v is the speed of the object relative to the fluid, A is the cross sectional area, and C_D is the drag coefficient – a dimensionless number. Escape velocity is the minimum speed a ballistic object needs to escape from a massive body such as Earth. It represents the kinetic energy that, when added to the object's gravitational potential energy (which is always negative), is equal to zero. The general formula for the escape velocity of an object at a distance r from the center of a planet with mass M is v_{\\text{e}} = \\sqrt{\\frac{2GM}{r}} = \\sqrt{2gr}, where G is the gravitational constant and g is the gravitational acceleration. The escape velocity from Earth's surface is about 11&nbsp;200&nbsp;m/s, and is irrespective of the direction of the object. This makes \"escape velocity\" somewhat of a misnomer, as the more correct term would be \"escape speed\": any object attaining a velocity of that magnitude, irrespective of atmosphere, will leave the vicinity of the base body as long as it does not intersect with something in its path. In special relativity, the dimensionless Lorentz factor appears frequently, and is given by \\gamma = \\frac{1}{\\sqrt{1-\\frac{v^2}{c^2}}} where γ is the Lorentz factor and c is the speed of light. ==Relative velocity== Relative velocity is a measurement of velocity between two objects as determined in a single coordinate system. Relative velocity is fundamental in both classical and modern physics, since many systems in physics deal with the relative motion of two or more particles. Consider an object A moving with velocity vector v and an object B with velocity vector w; these absolute velocities are typically expressed in the same inertial reference frame. Then, the velocity of object A object B is defined as the difference of the two velocity vectors: \\boldsymbol{v}_{A\\text{ relative to }B} = \\boldsymbol{v} - \\boldsymbol{w} Similarly, the relative velocity of object B moving with velocity w, relative to object A moving with velocity v is: \\boldsymbol{v}_{B\\text{ relative to }A} = \\boldsymbol{w} - \\boldsymbol{v} Usually, the inertial frame chosen is that in which the latter of the two mentioned objects is in rest. In Newtonian mechanics, the relative velocity is independent of the chosen inertial reference frame. This is not the case anymore with special relativity in which velocities depend on the choice of reference frame. ===Scalar velocities=== In the one-dimensional case, the velocities are scalars and the equation is either: v_\\text{rel} = v - (-w), if the two objects are moving in opposite directions, or: v_\\text{rel} = v -(+w), if the two objects are moving in the same direction. ==Coordinate systems== v_x=dx/dt, v_y=dy/dt. The two-dimensional velocity vector is then defined as \\textbf{v}=\\langle v_x, v_y\\rangle . The magnitude of this vector represents speed and is found by the distance formula as |\\mathbf{v}|=\\sqrt{v_x^2+v_y^2}. In three-dimensional systems where there is an additional z-axis, the corresponding velocity component is defined as v_z=dz/dt. The three-dimensional velocity vector is defined as \\textbf{v}=\\langle v_x, v_y, v_z\\rangle with its magnitude also representing speed and being determined by |\\mathbf{v}|=\\sqrt{v_x^2+v_y^2+v_z^2}. While some textbooks use subscript notation to define Cartesian components of velocity, others use u , v , and w for the x -, y -, and z -axes respectively. \\boldsymbol{v}=\\boldsymbol{v}_T+\\boldsymbol{v}_R where \\boldsymbol{v}_T is the transverse velocity \\boldsymbol{v}_R is the radial velocity. The radial speed (or magnitude of the radial velocity) is the dot product of the velocity vector and the unit vector in the radial direction. v_R = \\frac{\\boldsymbol{v} \\cdot \\boldsymbol{r}}{\\left|\\boldsymbol{r}\\right|} = \\boldsymbol{v} \\cdot \\hat{\\boldsymbol{r}} where \\boldsymbol{r} is position and \\hat{\\boldsymbol{r}} is the radial direction. The transverse speed (or magnitude of the transverse velocity) is the magnitude of the cross product of the unit vector in the radial direction and the velocity vector. It is also the dot product of velocity and transverse direction, or the product of the angular speed \\omega and the radius (the magnitude of the position). v_T=\\frac = \\boldsymbol{v} \\cdot \\hat{\\boldsymbol{t}}=\\omega|\\boldsymbol{r}| such that \\omega=\\frac {|\\boldsymbol{r}|^2}. Angular momentum in scalar form is the mass times the distance to the origin times the transverse velocity, or equivalently, the mass times the distance squared times the angular speed. The sign convention for angular momentum is the same as that for angular velocity. L = mrv_T = mr^2\\omega where m is mass r=|\\boldsymbol{r}|. The expression mr^2 is known as moment of inertia. If forces are in the radial direction only with an inverse square dependence, as in the case of a gravitational orbit, angular momentum is constant, and transverse speed is inversely proportional to the distance, angular speed is inversely proportional to the distance squared, and the rate at which area is swept out is constant. These relations are known as Kepler's laws of planetary motion. ==See also== ==Notes== Robert Resnick and Jearl Walker, Fundamentals of Physics, Wiley; 7 Sub edition (June 16, 2004). . ==References== ==External links== Introduction to Mechanisms (Carnegie Mellon University)",
  "categories": [
    "20314188",
    "20444516",
    "23118434",
    "23603337",
    "27206937",
    "28269683",
    "46717101",
    "62869916"
  ],
  "license": "CC BY-SA 4.0",
  "source_uri": "https://en.wikipedia.org/w/index.php?oldid=1371475376",
  "content_hash": "c6348bb06fe4b82a04033f15b59fe24e800d6ec0850ec84053aa67022140bee3",
  "created_at": 1792309498.97741,
  "updated_at": 1787758724.0,
  "claims": [],
  "contradictions": [],
  "confidence": 0.6,
  "csl": {
    "id": "velocity-195839-c6348bb06fe4b82a",
    "type": "webpage",
    "title": "Velocity",
    "author": [
      {
        "family": "Anticloud FZ LLE",
        "literal": "Anticloud FZ LLE"
      }
    ],
    "container-title": "encyclopegia.org",
    "publisher": "Anticloud FZ LLE",
    "publisher-place": "Dubai, United Arab Emirates",
    "URL": "https://encyclopegia.org/a/velocity",
    "issued": {
      "date-parts": [
        [
          2026,
          10,
          18
        ]
      ]
    },
    "accessed": {
      "date-parts": [
        [
          2026,
          11,
          17
        ]
      ]
    },
    "license": "CC BY-SA 4.0",
    "DOI": "eo1:velocity-195839-c6348bb06fe4b82a",
    "isBasedOn": "https://en.wikipedia.org/w/index.php?oldid=1371475376",
    "note": "Immutable snapshot velocity-195839-c6348bb06fe4b82a, content root c6348bb06fe4b82a…"
  }
}