Lesson plan

Versamat

Versamat is a Kodak trade name for their automated film processing units, for both with versions for black and white as well as color-capable. First and foremost, Versamats were designed for short roll/single photo developing. Many places, however, have used it for long roll film; it can handle film up to approx. 12 inches wide. With long rolls, however, there are a lot of problems because the film passes over many rollers. Most long roll film processors, on the other hand, use one roller at the top and bottom of each tank, which means that the film contacts only a few of them for the entire run. The Versamat has multiple uses and possible processing styles. For instance, the Versamat 1140 has 7 tanks, each with a full rack in it. The film goes in the supply side, and follows the racks up and down through the tanks to be processed. Most Versamats use developer, followed by a stop bath, fix, water wash, and finally conditioner. Some variations don't require the stop bath. The Versamat also has control over the height of the liquid/chemical, as well as speed of the film, to determine how long it is in each solution.…

Back to article

Article summary

Versamat is a Kodak trade name for their automated film processing units, for both with versions for black and white as well as color-capable. First and foremost, Versamats were designed for short roll/single photo developing. Many places, however, have used it for long roll film; it can handle film up to approx. 12 inches wide. With long rolls, however, there are a lot of problems because the film passes over many rollers. Most long roll film processors, on the other hand, use one roller at the top and bottom of each tank, which means that the film contacts only a few of them for the entire run. The Versamat has multiple uses and possible processing styles. For instance, the Versamat 1140 has 7 tanks, each with a full rack in it. The film goes in the supply side, and follows the racks up and down through the tanks to be processed. Most Versamats use developer, followed by a stop bath, fix, water wash, and finally conditioner. Some variations don't require the stop bath. The Versamat also has control over the height of the liquid/chemical, as well as speed of the film, to determine how long it is in each solution.…

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.