view factor

Uses your system voice; voice and rate in settings.

Q166860Snapshot

≈ 3 min read

Names in other languages

  • Françaisfacteur de forme
  • PortuguêsFator de vista
  • DeutschSichtfaktor
  • Englishview factor
  • 한국어view factoe
  • 日本語形態係数
  • 中文視界因子

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

In radiative heat transfer, a view factor, is the proportion of the radiation which leaves surface A that strikes surface In a complex 'scene' there can be any number of different objects, which can be divided in turn into even more surfaces and surface segments. View factors are also sometimes known as configuration factors, form factors, angle factors or shape factors.

In radiative heat transfer, a view factor, is the proportion of the radiation which leaves surface A that strikes surface In a complex 'scene' there can be any number of different objects, which can be divided in turn into even more surfaces and surface segments. View factors are also sometimes known as configuration factors, form factors, angle factors or shape factors. \sum_{j=1}^n {F_{S_i \rarr S_j}} = 1 where n is the number of surfaces in the enclosure. Any enclosure with n surfaces has a total n^2 view factors.

For example, consider a case where two blobs with surfaces and are floating around in a cavity with surface . All of the radiation that leaves must either hit or , or if is concave, it could hit . 100% of the radiation leaving is divided up among , , and . Confusion often arises when considering the radiation that at a surface.

In that case, it generally does not make sense to sum view factors as view factor from and view factor from (above) are essentially different units. may see 10% of radiation and 50% of radiation and 20% of radiation, but without knowing how much each radiates, it does not even make sense to say that receives 80% of the total radiation. A_i F_{i \rarr j} = A_j F_{j \rarr i} where A_i and A_j are the areas of the two surfaces. For a convex surface, no radiation can leave the surface and then hit it later, because radiation travels in straight lines.

Hence, for convex surfaces, F_{i \rarr i} = 0. For concave surfaces, this doesn't apply, and so for concave surfaces F_{i \rarr i} > 0. F_{1 \rarr (2,3)}=F_{1 \rarr 2}+F_{1\rarr 3}. dF_{1 \rarr 2} = \frac{\cos\theta_1 \cos\theta_2}{\pi s^2}\hbox{d}A_2 where \theta_1 and \theta_2 are the angle between the surface normals and a ray between the two differential areas.

The view factor from a general surface A_1 to another general surface A_2 is given by: F_{1 \rarr 2} = \frac{1}{A_1} \int_{A_1} \int_{A_2} \frac{\cos\theta_1 \cos\theta_2}{\pi s^2}\, \hbox{d}A_2\, \hbox{d}A_1. Similarly the view factor F_{2\rightarrow 1} is defined as the fraction of radiation that leaves A_2 and is intercepted by yielding the equation F_{2 \rarr 1} = \frac{1}{A_2} \int_{A_1} \int_{A_2} \frac{\cos\theta_1 \cos\theta_2}{\pi s^2}\, \hbox{d}A_2\, \hbox{d}A_1. The view factor is related to the concept of etendue.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1308599170 under CC BY-SA 4.0; modifications have been made.

Provenance

snapshot view-factor-020085-63135fc88790e02e · hash 63135fc88790e02edb55d196dd17daa03a0139e936c0f140fe6904080f52b737 · captured 1756546340.0 · version history

Cite this page as: encyclopegia.org, “view factor”, snapshot view-factor-020085-63135fc88790e02e. https://encyclopegia.org/a/view-factor

Sources cited in this revision

No external citation was extracted for this revision. That is a statement about the source, not a claim that none exists.