Virgo interferometer

Uses your system voice; voice and rate in settings.

Snapshot

≈ 8 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

The Virgo interferometer is a large-scale scientific instrument near Pisa, Italy, for detecting gravitational waves. The detector is a Michelson interferometer, which can detect the minuscule length variations in its two arms induced by the passage of gravitational waves. The required precision is achieved using many systems to isolate it from the outside world, including keeping its mirrors and instrumentation in an ultra-high vacuum and suspending them using complex systems of pendula.

Background

Between its periodic observations, the detector is upgraded to increase its sensitivity. The observation runs are performed in collaboration with other similar detectors, including the two Laser Interferometer Gravitational-Wave Observatories (LIGO) in the United States and the Japanese Kamioka Gravitational Wave Detector (KAGRA), because cooperation between several detectors is crucial for detecting gravitational waves and pinpointing their origin. Virgo was conceived and built when gravitational waves were only a prediction of general relativity.

The project, named after the Virgo galaxy cluster, was approved in 1992 and construction was completed in 2003. After several years without detection, Virgo was shut down in 2011 for the "Advanced Virgo" upgrades. In 2015, the first observation of gravitational waves was made by the two LIGO detectors, while Virgo was still being upgraded.…

The Virgo interferometer is a large-scale scientific instrument near Pisa, Italy, for detecting gravitational waves. The detector is a Michelson interferometer, which can detect the minuscule length variations in its two arms induced by the passage of gravitational waves. The required precision is achieved using many systems to isolate it from the outside world, including keeping its mirrors and instrumentation in an ultra-high vacuum and suspending them using complex systems of pendula.

Between its periodic observations, the detector is upgraded to increase its sensitivity. The observation runs are performed in collaboration with other similar detectors, including the two Laser Interferometer Gravitational-Wave Observatories (LIGO) in the United States and the Japanese Kamioka Gravitational Wave Detector (KAGRA), because cooperation between several detectors is crucial for detecting gravitational waves and pinpointing their origin. Virgo was conceived and built when gravitational waves were only a prediction of general relativity.

The project, named after the Virgo galaxy cluster, was approved in 1992 and construction was completed in 2003. After several years without detection, Virgo was shut down in 2011 for the "Advanced Virgo" upgrades. In 2015, the first observation of gravitational waves was made by the two LIGO detectors, while Virgo was still being upgraded.

Virgo resumed observations in early August 2017, making its first detection on 14 August (together with the LIGO detectors); this was quickly followed by the detection of the GW170817 gravitational wave, the only one also observed with classical methods (optical, gamma-ray, X-ray and radio telescopes) Virgo is hosted by the European Gravitational Observatory (EGO), a consortium founded by the French Centre National de la Recherche Scientifique (CNRS) and the Italian Istituto Nazionale di Fisica Nucleare (INFN).

Evidence and sources

The broader Virgo Collaboration, gathering 940 members1 in 20 countries, operates the detector, and defines the strategy and policy for its use and upgrades. The LIGO and Virgo collaborations have shared their data since 2007, and with KAGRA since 2019, forming the LIGO-Virgo-KAGRA (LVK) collaboration.

File:Virgo aerial view 01.jpg|alt=Aerial view, with several white buildings and two long blue tubes forming a right angle|2015 aerial view of the Virgo site, showing the west arm (top) and part of the north arm (right), along with the various buildings File:Virgo Cascina panorama.jpg|alt=Panorama of the site, with mountains in the background|Panorama of the entrance of the Virgo site File:IGP9215.JPG|alt=The north arm, with mountains in the background|The north arm File:IGP9210.JPG|alt=Above-ground view of the site, with parked cars for scale|(Front) Detector control-room building and local computer center File:Virgo Cascina Central building.jpg|alt=A square, white, windowless building with three flags in front|The central building, containing most of the instrument critical components File:IGP9212.JPG|alt=Two blue tubes, one much longer than the other|The mode-cleaner cavity (left, which filters the laser beam) and the west arm From the air, the Virgo detector has an "L" shape with its two perpendicular arms.

At the intersection of the two arms, the central building is found, containing most of Virgo's key components including the laser, the beamsplitter and the input mirrors. Alongside the west arm, a shorter cavity and the associated building host the input mode-cleaner. The end mirrors are contained in a dedicated building at the end of each arm. South of the west arm, additional buildings contains offices, workshops, as well as the site computing center and the instrument control room.

Impact

The arm "tunnels" house pipes in which the laser beams travel in a vacuum. Virgo is one of Europe's largest ultra-high vacuum installation, with a volume of . The two arms are made of a long steel pipe in diameter, in which the target residual pressure is about one-thousandth of a billionth of an atmosphere (100 times thinner than in the original Virgo). The residual gas molecules, primarily hydrogen and water, have a limited impact on the laser beams' path.

How it works

Large gate valves are at both ends of the arms so work can be done in the mirror-vacuum towers without breaking an arm's ultra-high vacuum. The towers containing the mirrors and attenuators are split into two sections, with different pressures. The tubes undergo a process, known as baking, in which they are heated to to remove unwanted particles from their surfaces; although the towers were also baked in the initial Virgo design, cryogenic traps are now used to prevent contamination.

Due to the interferometer's high power, its mirrors are susceptible to the effects of heating induced by the laser (despite extremely low absorption). These effects can cause deformation of the surface due to dilation or a change in refractive index of the substrate, resulting in power escaping from the interferometer and perturbations of the signal.

These effects are accounted for by a thermal compensation system (TCS) which includes Hartmann wavefront sensors to measure optical aberration through an auxiliary light source, and two actuators: CO 2 lasers (which heat parts of the mirror to correct the defects) and ring heaters, which adjust the mirror's radius of curvature. The system also corrects "cold defects": permanent defects introduced during mirror manufacture.

During the O3 run, the TCS increased power inside the interferometer by 15 per cent and decreased power leaving the interferometer by a factor of two. Another important component is the system for controlling stray light (any light leaving the interferometer's designated path, by scattering on a surface or from unwanted reflection). Recombination of stray light with the interferometer's main beam can be a significant noise source, often difficult to track and model.

Most efforts to mitigate stray light are based on absorbing plates (known as baffles) placed near the optics and within the tubes; additional precautions are taken to prevent the baffles from affecting interferometer operation. Calibration is required to estimate the detector's response to gravitational waves and correctly reconstruct the signal. It involves moving the mirrors in a controlled way and measuring the result.

During the initial Virgo era, this was primarily achieved by agitating a pendulum on which the mirror is suspended with coils to generate a magnetic field interacting with magnets fixed to the pendulum. This technique was used until O2. For O3, the primary calibration method was photon calibration (PCal); it had been a secondary method to validate the results, using an auxiliary laser to displace the mirror with radiation pressure.

A method known as Newtonian calibration (NCal) was introduced at the end of O2 to validate the PCal results; it relies on gravity to move the mirror, placing a rotating mass at a specific distance from it. At the beginning of the second part of O4, Ncal became the main calibration method because it performed better than PCal; PCal is still used to validate NCal results and probe higher frequencies which are inaccessible to the NCal.

The instrument requires an efficient data-acquisition system which manages data measured at the interferometer's output and from sensors on the site, writing it in files and distributing the files for data analysis. Dedicated electronic hardware and software have been developed for this purpose.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1376470056 under CC BY-SA 4.0; modifications have been made.

References

  1. ↩Wikipedia “Virgo interferometer” revision 1376470056 · retrieved 2026-10-20 members (×1) · confidence 0.95 revision URL