Lesson plan

Virtual circuit multiplexing

Virtual circuit multiplexing or VC-MUX is one of the two (the other being LLC encapsulation) mechanisms for identifying the protocol carried in ATM Adaptation Layer 5 (AAL5) frames specified by , Multiprotocol Encapsulation over ATM. With virtual circuit multiplexing, the communicating hosts agree to send only one packets belonging to a single high-level protocol on any given ATM virtual circuit, and multiple virtual circuits may need to be set up. It has the advantage of not requiring additional protocol-identifying information in a packet, which minimizes the overhead. For example, if the hosts agree to transfer IP, a sender can pass each datagram directly to AAL5 to transfer, nothing needs to be sent besides the datagram and the AAL5 trailer. This reduction in overhead tends to further improve efficiency (e.g., an IPv4 datagram containing a TCP ACK-only packet with neither IP nor TCP options exactly fits into a single ATM cell). The chief disadvantage of such a scheme lies in duplication of virtual circuits: a host must create a separate virtual circuit for each high-level protocol if more than one protocol is used. Because most carriers charge for each virtual circuit, customers try to avoid using multiple circuits because it adds unnecessary cost. It is commonly used in conjunction with PPPoA which is used in various xDSL implementations.

Back to article

Article summary

Virtual circuit multiplexing or VC-MUX is one of the two (the other being LLC encapsulation) mechanisms for identifying the protocol carried in ATM Adaptation Layer 5 (AAL5) frames specified by , Multiprotocol Encapsulation over ATM. With virtual circuit multiplexing, the communicating hosts agree to send only one packets belonging to a single high-level protocol on any given ATM virtual circuit, and multiple virtual circuits may need to be set up. It has the advantage of not requiring additional protocol-identifying information in a packet, which minimizes the overhead. For example, if the hosts agree to transfer IP, a sender can pass each datagram directly to AAL5 to transfer, nothing needs to be sent besides the datagram and the AAL5 trailer. This reduction in overhead tends to further improve efficiency (e.g., an IPv4 datagram containing a TCP ACK-only packet with neither IP nor TCP options exactly fits into a single ATM cell). The chief disadvantage of such a scheme lies in duplication of virtual circuits: a host must create a separate virtual circuit for each high-level protocol if more than one protocol is used. Because most carriers charge for each virtual circuit, customers try to avoid using multiple circuits because it adds unnecessary cost. It is commonly used in conjunction with PPPoA which is used in various xDSL implementations.

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.