Lesson plan
Viscometer
A viscometer (also called viscosimeter) is an instrument used to measure the viscosity of a fluid. Viscometers can only measure constant viscosity, that is, viscosity that does not change with flow conditions. For liquids with viscosities which vary with flow conditions, an instrument called a rheometer is used. Thus, a rheometer can be considered as a special type of viscometer. rotational (left) and kinematic (right) viscometers at DEF-TECH Bharat 2026, KTPO, Bengaluru In general, either the fluid remains stationary and an object moves through it, or the object is stationary and the fluid moves past it. The drag caused by relative motion of the fluid and a surface is a measure of the viscosity. The flow conditions must have a sufficiently small value of Reynolds number for there to be laminar flow. At 20 °C, the dynamic viscosity (kinematic viscosity × density) of water is 1.0038 mPa·s and its kinematic viscosity (product of flow time × factor) is 1.0022 mm 2 /s. These values are used for calibrating certain types of viscometers.
Article summary
A viscometer (also called viscosimeter) is an instrument used to measure the viscosity of a fluid. Viscometers can only measure constant viscosity, that is, viscosity that does not change with flow conditions. For liquids with viscosities which vary with flow conditions, an instrument called a rheometer is used. Thus, a rheometer can be considered as a special type of viscometer. rotational (left) and kinematic (right) viscometers at DEF-TECH Bharat 2026, KTPO, Bengaluru In general, either the fluid remains stationary and an object moves through it, or the object is stationary and the fluid moves past it. The drag caused by relative motion of the fluid and a surface is a measure of the viscosity. The flow conditions must have a sufficiently small value of Reynolds number for there to be laminar flow. At 20 °C, the dynamic viscosity (kinematic viscosity × density) of water is 1.0038 mPa·s and its kinematic viscosity (product of flow time × factor) is 1.0022 mm 2 /s. These values are used for calibrating certain types of viscometers.
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.