Lesson plan
Viscosity
In continuum mechanics, viscosity is a property of a fluid that quantifies the resistance force acting on fluids when there is relative motion between fluid parcels. This resistance force is caused by the stress in fluid parcels, which ideally is directly proportional to the strain rate (the time derivative of strain) that arises when fluid parcels are in relative motion, and the relative speed between the boundary between adjacent fluid parcels is zero. In liquids, viscosity arises from cohesive molecular forces, while in gases it results from molecular collisions. Except for the case of superfluidity, there is no fluid with zero viscosity, and thus all fluid flows involve viscous effects to some degree. For liquids, it corresponds to the informal concept of thickness; for example, syrup has a higher viscosity than water. Viscosity is defined scientifically as a force multiplied by a time divided by an area. Thus its SI units are newton-seconds per metre squared, or pascal-seconds. For instance, when a viscous fluid is forced through a tube, it flows more quickly near the tube's center line than near its walls. Some stress (such as a pressure difference between the two ends of the tube) is needed to sustain the flow. This is because a force is required to overcome the friction between the layers of the fluid which are in relative motion.…
Article summary
In continuum mechanics, viscosity is a property of a fluid that quantifies the resistance force acting on fluids when there is relative motion between fluid parcels. This resistance force is caused by the stress in fluid parcels, which ideally is directly proportional to the strain rate (the time derivative of strain) that arises when fluid parcels are in relative motion, and the relative speed between the boundary between adjacent fluid parcels is zero. In liquids, viscosity arises from cohesive molecular forces, while in gases it results from molecular collisions. Except for the case of superfluidity, there is no fluid with zero viscosity, and thus all fluid flows involve viscous effects to some degree. For liquids, it corresponds to the informal concept of thickness; for example, syrup has a higher viscosity than water. Viscosity is defined scientifically as a force multiplied by a time divided by an area. Thus its SI units are newton-seconds per metre squared, or pascal-seconds. For instance, when a viscous fluid is forced through a tube, it flows more quickly near the tube's center line than near its walls. Some stress (such as a pressure difference between the two ends of the tube) is needed to sustain the flow. This is because a force is required to overcome the friction between the layers of the fluid which are in relative motion.…
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.