Lesson plan

vitrified tile

A vitrified tile is a ceramic tile with very low porosity, produced by vitrification of the tile body during firing at high temperatures (typically 1,200–1,250 °C). Under ISO 13006, a "fully vitrified" tile has a water absorption coefficient of no more than 0.5% by mass. Vitrified tiles are an alternative to marble and granite flooring and are often used outdoors due to their water and frost resistance. Vitrified tile is made by hydraulic pressing a mixture of clay, quartz, feldspar, and silica, then firing to produce a vitreous (glass-like) surface. The result is a dense, single-mass body with very low porosity. Different clay bodies reach vitrification at different temperatures.

Back to article

Article summary

A vitrified tile is a ceramic tile with very low porosity, produced by vitrification of the tile body during firing at high temperatures (typically 1,200–1,250 °C). Under ISO 13006, a "fully vitrified" tile has a water absorption coefficient of no more than 0.5% by mass. Vitrified tiles are an alternative to marble and granite flooring and are often used outdoors due to their water and frost resistance. Vitrified tile is made by hydraulic pressing a mixture of clay, quartz, feldspar, and silica, then firing to produce a vitreous (glass-like) surface. The result is a dense, single-mass body with very low porosity. Different clay bodies reach vitrification at different temperatures.

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.