VoATM

Uses your system voice; voice and rate in settings.

Snapshot

≈ 2 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

Voice over Asynchronous Transfer Mode (VoATM) is a data protocol used to transport packetized voice signals over an Asynchronous Transfer Mode (ATM) network. In ATM, the voice traffic is encapsulated using AAL1/AAL2 ATM packets. VoATM over DSL is a similar service, which is used to carry packetized voice signals over a DSL connection.

Voice over Asynchronous Transfer Mode (VoATM) is a data protocol used to transport packetized voice signals over an Asynchronous Transfer Mode (ATM) network. In ATM, the voice traffic is encapsulated using AAL1/AAL2 ATM packets. VoATM over DSL is a similar service, which is used to carry packetized voice signals over a DSL connection.

Protocols

ATM Adaptation Layer 1 (AAL1) ATM Adaptation Layer 2 (AAL2)

Deployment

VoATM is a multi-service, high speed, scalable technology but rarely found because of its expensive services.

Prioritization

Prioritization is implemented through QoS parameters.

Fragmentation

Fragmentation is built into ATM with its small, fixed-sized, 53-byte cells.

Variable delay

Dynamic Bandwidth Circuit Emulation Service (DBCES) does not send a constant bit stream of cells but transmit only at an active voice call, reducing delays and variations.

Echo cancellation

VoATM transports data, voice, and video at very high speed. The same method for echo cancellation is employed.

See also

Professional wide band audio over ATM as standardized by Audio Engineering Society in AES47.

References

Text derived from https://en.wikipedia.org/w/index.php?oldid=1311955757 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

3 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.