Volute spring

Article summary

A volute spring, also known as a conical spring, is a compression spring in the form of a cone (somewhat like the classical volute decorative architectural ornament). Under compression, the coils slide past each other, thus enabling the spring to be compressed to a very short length in comparison with what would be possible with a more conventional helical spring. There are two typical types of volute spring: *The first has a shape for the initial spring steel (or other material for the wound spring) as a "V", with one end wider than the other *The second is the double volute, having two "V" shapes facing away from each other, which forms a distorted cylinder having a wider diameter at the centre than at the ends, forming symmetric attachment points Double volute springs can frequently be found as a component of garden pruning shears. Short posts anchored in each side of the handles, and inserted into each narrow end of the spring, keep the spring in position. However, the applications of volute springs are not limited to such light-duty purposes as gardening shears. For example, volute springs are used to cushion the impact between railway cars and as a core element of the suspension system of Sherman tanks. A volute spring buffer device for railway cars was invented by John Brown in 1848. Image:Volute spring1.jpg|A double volute spring mounted in pruning shears.…

Key claims

No claims recorded.

Discussion questions

1. Summarise the article in your own words. Which single claim would you verify first, and why?
2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.