Volvo B6F

Volvo B609, Volvo B6F and Volvo B6FA were a series of front-engined midibus chassises manufactured by Volvo between 1976 and 1987.

Uses your system voice; voice and rate in settings.

Snapshot

≈ 2 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

Volvo B609, Volvo B6F and Volvo B6FA were a series of front-engined midibus chassises manufactured by Volvo between 1976 and 1987. Its predecessor, the B54 was not a success, while the interim replacement, the BB57 was too large, so in 1976 Volvo launched the B609, which was in many ways just a Volvo F6 truck chassis without the cab, which meant it had the engine mounted on top of the front axle.

In 1978 it was replaced by the B6F, which was built in the same way, but a bit more adapted to bus needs. Volvo also introduced the B6FA, which was a more conventional front-engined chassis, and a bit larger too. While the B6F had max gross weight of 9.3 tonnes the B6FA would manage 12 tonnes.

While production of the smaller B6F ended in 1982, the B6FA lasted until 1987. There were no successors to this series, but in 1991 the B6 name was used again when a new rear-engined chassis was introduced. In Australia, the B6FA was purchased by Western Road Transport in Sydney and US Bus Lines in Melbourne.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1373056644 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

3 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.