VPNFilter

Uses your system voice; voice and rate in settings.

Snapshot

≈ 5 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

VPNFilter is malware designed to infect routers and certain network attached storage devices. It is estimated to have infected approximately 500,000 routers worldwide at its peak, though the number of at-risk devices is larger. It can steal data, contains a "kill switch" designed to disable the infected router on command, and is able to persist should the user reboot the router. The FBI believes that it was created by the Russian Fancy Bear group. In February 2022, the CISA announced that a new malware called Cyclops Blink produced by Sandworm had replaced VPNFilter.

VPNFilter is malware designed to infect routers and certain network attached storage devices. It is estimated to have infected approximately 500,000 routers worldwide at its peak, though the number of at-risk devices is larger. It can steal data, contains a "kill switch" designed to disable the infected router on command, and is able to persist should the user reboot the router. The FBI believes that it was created by the Russian Fancy Bear group. In February 2022, the CISA announced that a new malware called Cyclops Blink produced by Sandworm had replaced VPNFilter.

Operation

VPNFilter is malware that infects a number of different kinds of network routers and storage devices. It seems to be designed in part to target serial networking devices using the Modbus protocol to talk to and control industrial hardware, as in factories and warehouses. The malware has special, dedicated code to target control systems using SCADA. The initial infection vector is still unknown. The Cisco Talos security group hypothesizes the malware exploits known router security vulnerabilities to infect devices.

This software installs itself in multiple stages: Stage 1 involves a worm which adds code to the device's crontab (the list of tasks run at regular intervals by the cron scheduler on Linux). This allows it to remain on the device after a reboot, and to re-infect it with the subsequent stages if they are removed. Stage 1 uses known URLs to find and install Stage 2 malware. If those known URLs are disabled, Stage 1 sets up a socket listener on the device and waits to be contacted by command and control systems.

Stage 2 is the body of the malware, including the basic code that carries out all normal functions and executes any instructions requested by special, optional Stage 3 modules. Stage 3 can be any of various "modules" that tell the malware to do specific things, like sniffing network data, gathering credentials, serving as a relay point to hide the origin of subsequent attacks, or collecting data on industrial control devices (Modbus SCADA). Any exfiltrated data can then be encrypted via the Tor network.

Devices at risk

The initial worm that installs VPNFilter can only attack devices running embedded firmware based on Busybox on Linux compiled only for specific processors. This does not include non-embedded Linux devices such as workstations and servers.

Manufacturer-provided firmware on the following router models is known to be at risk: Asus RT-AX92U RT-AC66U RT-N10 RT-N10E RT-N10U RT-N56U RT-N66U D-Link DES-1210-08P DIR-300 DIR-300A DSR-250N DSR-500N DSR-1000 DSR-1000N Huawei HG8245 Linksys E1200 E2500 E3000 E3200 E4200 RV082 WRVS4400N Mikrotik CCR1009 CCR1016 CCR1036 CCR1072 CRS109 CRS112 CRS125 RB411 RB450 RB750 RB911 RB921 RB941 RB951 RB952 RB960 RB962 RB1100 RB1200 RB2011 RB3011 RB Groove RB Omnitik STX5 Mikrotik RouterOS versions up to 6.38.5 on current or 6.37.5 on bugfix release chains Netgear DG834 DGN1000 DGN2200 DGN3500 FVS318N MBRN3000 R6400 R7000 R8000 WNR1000 WNR2000 WNR2200 WNR4000 WNDR3700 WNDR4000 WNDR4300 WNDR4300-TN UTM50 QNAP TS251 TS439 Pro Other QNAP NAS devices running QTS software TP-Link R600VPN TL-WR741ND TL-WR841N Ubiquiti NSM2 PBE M5 Upvel Unknown Models ZTE ZXHN H108N

Epidemiology

VPNFilter is described by Cisco Talos as having infected as many as 500,000 devices worldwide, in perhaps 54 different countries, though proportionately the focus has been on Ukraine.

FBI investigation

The FBI has taken a high-profile role in addressing this malware, conducting an investigation that resulted in the seizure of the domain name toknowall.com as ostensibly having been used to redirect queries from stage 1 of the malware, allowing it to locate and install copies of stages 2 and 3. The US Justice Department also compelled the site Photobucket to disable known URLs used to distribute malware Stage 2.

FBI recommendation on removing the infection

On 25 May 2018, the FBI recommended that users reboot their at-risk devices. This would temporarily remove the stages 2 and 3 of the malware. Stage 1 would remain, leading the router to try re-downloading the payload and infecting the router again. However, prior to the recommendation the US Justice Department seized web endpoints the malware uses for Stage 2 installation. Without these URLs, the malware must rely on the fallback socket listener for Stage 2 installation.

This method requires threat actor command and control systems to contact each system to install Stage 2, increasing the threat actor's risk of being identified. The FBI further recommended users disable remote management on their devices and update the firmware. A firmware update removes all stages of the malware, though it is possible the device could be reinfected. The FBI said that this would help them to find the servers distributing the payload.

Notes

References

Text derived from https://en.wikipedia.org/w/index.php?oldid=1345628144 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

16 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.