Lesson plan

VR Class Pr2

The Finnish VR Class Pr2, nicknamed "Henschel", was a passenger tank class ordered from the Henschel & Son locomotive workshops by the Estonia State Railways in the spring 1939 and completed in 1941. The outbreak of the Second World War prevented their delivery to Estonia, but at least a few of these engines did manage to operate in Latvia in 1942. These engines became superfluous, because the Germans were converting the Baltic tracks to standard gauge, and so Finland could purchase these four engines. They were classified Pr2 and numbered 1800–1803 after their arrival in December 1942. The Pr2 tank engines were quite advanced locomotives, based on the Henschel Class 62 tank engine design of 1928. After their initial problems were solved, they proved to be fast runners and an ideal addition to the motive power roster. They were originally built by as oil-burners, and reverted to this type of fuel between 1947 and 1954 when oil prices were low. The Pr2 was very fast with its 1,830 mm wheel diameter. One of the Pr2 engines achieved 144 km/h during a test trial run. No. 1803, the final Pr2 in service, was withdrawn in May 1960. Only No. 1800 has been preserved at Haapamäki.

Back to article

Article summary

The Finnish VR Class Pr2, nicknamed "Henschel", was a passenger tank class ordered from the Henschel & Son locomotive workshops by the Estonia State Railways in the spring 1939 and completed in 1941. The outbreak of the Second World War prevented their delivery to Estonia, but at least a few of these engines did manage to operate in Latvia in 1942. These engines became superfluous, because the Germans were converting the Baltic tracks to standard gauge, and so Finland could purchase these four engines. They were classified Pr2 and numbered 1800–1803 after their arrival in December 1942. The Pr2 tank engines were quite advanced locomotives, based on the Henschel Class 62 tank engine design of 1928. After their initial problems were solved, they proved to be fast runners and an ideal addition to the motive power roster. They were originally built by as oil-burners, and reverted to this type of fuel between 1947 and 1954 when oil prices were low. The Pr2 was very fast with its 1,830 mm wheel diameter. One of the Pr2 engines achieved 144 km/h during a test trial run. No. 1803, the final Pr2 in service, was withdrawn in May 1960. Only No. 1800 has been preserved at Haapamäki.

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.