VR Class Vr3

Uses your system voice; voice and rate in settings.

Q5391689Snapshot

≈ 4 min read

Names in other languages

  • EnglishVR Class Vr3
  • fiVr3

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

The VR Class Vr3 was a class of steam locomotive built in Finland. Before 1942, the class was known as O1. They were nicknamed Kukko ("Rooster" or "Cockerel") and they have the same frames and boiler as the Vr Class Pr1 (Paikku) locomotive. The first locomotive was ordered in 1924 from Hanomag of Germany, number 10 351 and it was numbered 752. The remaining 4 were produced by Tampella Oy in Tampere. They were numbered 752 to 756. The VR3 was the largest and most powerful Finnish locomotive of its time.

It was a success, but in the hands of inexperienced drivers, it could all too easily damage buffers or break couplings. Therefore, a screw-drive regulator was fitted. At speed there could be longitudinal movement because the locomotive had no bogie wheels, only 5 rigid axles. However, the "Rooster" was generally considered to be a fine locomotive. Some say the name resulted from the slightly louder than a normal whistle. They were deliberately designed to work within very large rail yards, where the overall noise level could be very high.

For half a century, the chirpy crow of the "Rooster" was a familiar sound in Finnish marshalling yards. They proved to be agile and could easily scale the humps and complex pointwork of marshaling yards where their great power compensated for their low speed. They were in use until 1975.

The VR Class Vr3 was a class of steam locomotive built in Finland. Before 1942, the class was known as O1. They were nicknamed Kukko ("Rooster" or "Cockerel") and they have the same frames and boiler as the Vr Class Pr1 (Paikku) locomotive. The first locomotive was ordered in 1924 from Hanomag of Germany, number 10 351 and it was numbered 752. The remaining 4 were produced by Tampella Oy in Tampere. They were numbered 752 to 756. The VR3 was the largest and most powerful Finnish locomotive of its time.

It was a success, but in the hands of inexperienced drivers, it could all too easily damage buffers or break couplings. Therefore, a screw-drive regulator was fitted. At speed there could be longitudinal movement because the locomotive had no bogie wheels, only 5 rigid axles. However, the "Rooster" was generally considered to be a fine locomotive. Some say the name resulted from the slightly louder than a normal whistle. They were deliberately designed to work within very large rail yards, where the overall noise level could be very high.

For half a century, the chirpy crow of the "Rooster" was a familiar sound in Finnish marshalling yards. They proved to be agile and could easily scale the humps and complex pointwork of marshaling yards where their great power compensated for their low speed. They were in use until 1975.

See also

Finnish Railway Museum VR Group List of Finnish locomotives Jokioinen Museum Railway History of rail transport in Finland VR Class Pr1 VR Class Hr1 VR Class Tk3

External links

Steam Locomotives in Finland Including the Finnish Railway Museum O1 - Finnish Railway Historical Society

References

Sakari K. Salo: Höyryveturikirja, s. 14. Helsinki: Kustantaja Laaksonen, 2009. . Pölhö, Eljas – Pykälä-Aho, Mia: Suomen juna- ja raitiovaunukuvasto / Finnish Motive Power 1.1.1996., 1996. . Finnish / English

Text derived from https://en.wikipedia.org/w/index.php?oldid=1324165449 under CC BY-SA 4.0; modifications have been made.

Provenance

snapshot vr-class-vr3-613840-50e5b43c498c09c3 · hash 50e5b43c498c09c3739b5d37f147aecd786d7fee214e8536a5be65043c434c22 · captured 1764109811.0 · version history

Cite this page as: encyclopegia.org, “VR Class Vr3”, snapshot vr-class-vr3-613840-50e5b43c498c09c3. https://encyclopegia.org/a/vr-class-vr3

Sources cited in this revision

2 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.