Lesson plan
Vycor
Vycor is the brand name of Corning's high-silica, high-temperature glass. It provides very high thermal shock resistance. Vycor is approximately 96% silica and 4% boron trioxide, but unlike pure fused silica, it can be readily manufactured in a variety of shapes. Vycor can be subjected to prolonged usage at 900 °C. Vycor products are made by a multi-step process. First, a relatively soft alkali-borosilicate glass is melted and formed by typical glassworking techniques into the desired shape. This is heat-treated, which causes the material to separate into two intermingled "phases" with distinct chemical compositions. One phase is rich in alkali and boric oxide and can be easily dissolved in acid. The other phase is mostly silica, which is insoluble. The glass object is then soaked in a hot acid solution, which leaches away the soluble glass phase, leaving an object which is mostly silica. At this stage, the glass is porous. Finally, the object is heated to more than 1200 °C, which consolidates the porous structure, making the object shrink slightly and become non-porous. The finished material is classified as a "reconstructed glass". For some applications the final step is skipped, leaving the glass porous. Such glass has a high affinity for water and makes an excellent getter for water vapour. It is widely used in science and engineering.…
Article summary
Vycor is the brand name of Corning's high-silica, high-temperature glass. It provides very high thermal shock resistance. Vycor is approximately 96% silica and 4% boron trioxide, but unlike pure fused silica, it can be readily manufactured in a variety of shapes. Vycor can be subjected to prolonged usage at 900 °C. Vycor products are made by a multi-step process. First, a relatively soft alkali-borosilicate glass is melted and formed by typical glassworking techniques into the desired shape. This is heat-treated, which causes the material to separate into two intermingled "phases" with distinct chemical compositions. One phase is rich in alkali and boric oxide and can be easily dissolved in acid. The other phase is mostly silica, which is insoluble. The glass object is then soaked in a hot acid solution, which leaches away the soluble glass phase, leaving an object which is mostly silica. At this stage, the glass is porous. Finally, the object is heated to more than 1200 °C, which consolidates the porous structure, making the object shrink slightly and become non-porous. The finished material is classified as a "reconstructed glass". For some applications the final step is skipped, leaving the glass porous. Such glass has a high affinity for water and makes an excellent getter for water vapour. It is widely used in science and engineering.…
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.