Waco Primary Glider

The WACO primary glider or simply WACO glider, was an early product of the Waco Aircraft Company.

Uses your system voice; voice and rate in settings.

Snapshot

≈ 1 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

The WACO primary glider or simply WACO glider, was an early product of the Waco Aircraft Company. The low cost glider was intended to be flown from low hills or towed by a vehicle.

Design and development

The WACO glider was marketed as a low-cost training aircraft for individuals or glider clubs. About 300 were produced between 1930 and 1931. Replicas have been made using both steel tube or wood frames.

Plans are still available for homebuilt construction. The glider was designed to fly at low airspeeds. It could maintain flight at with a 15 to 1 glide ratio.

The fuselage is made of welded steel tubing. The wings use spruce spars, are wire supported and fabric covered. A releasable tow hook was mounted on the front.

Aircraft on display

Experimental Aircraft Association founder Paul Poberezny first learned to fly in a rebuilt WACO Primary glider. In 2002 a replica was built and flown by Poberezny in 2003. It is now on display at the EAA AirVenture Museum in Oshkosh, Wisconsin.

An original WACO primary glider is in the collection of the National Air and Space Museum. An original WACO primary glider was restored to airworthy condition by the Western Antique Aeroplane and Automobile Museum in Hood River, Oregon.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1357677121 under CC BY-SA 4.0; modifications have been made.

Provenance

snapshot enwiki-001357677121 · captured 2026-06-03 · not yet sealed in the ledger · verify the chain · version history

Cite this page as: encyclopegia.org, “Waco Primary Glider”, snapshot enwiki-001357677121. https://encyclopegia.org/a/waco-primary-glider

Sources cited in this revision

2 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.