Wafer-scale integration

Wafer-scale integration (WSI) is a system of building very large integrated circuit (commonly called a "chip") networks from an entire silicon wafer to produce a single "super-chip".

Uses your system voice; voice and rate in settings.

Snapshot

≈ 4 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

Wafer-scale integration (WSI) is a system of building very large integrated circuit (commonly called a "chip") networks from an entire silicon wafer to produce a single "super-chip". Combining large size and reduced packaging, WSI was expected to lead to dramatically reduced costs for some systems, notably massively parallel supercomputers, but is now being employed for deep learning.

The name is taken from the term very-large-scale integration, the state of the art when WSI was being developed.

Overview

In the normal integrated-circuit manufacturing process, a single large cylindrical crystal (boule) of silicon is produced and then cut into disks known as wafers. The wafers are then cleaned and polished in preparation for the fabrication process. A photographic process is used to pattern the surface according to where material should and should not be deposited.

The desired material is deposited and the photographic mask is removed for the next layer. From then on the wafer is repeatedly processed in this fashion, putting on layer after layer of circuitry on the surface. Multiple copies of these patterns are deposited on the wafer in a grid fashion across the surface of the wafer.

After all the possible locations are patterned, the wafer surface appears like a sheet of graph paper, with grid lines delineating the individual chips. Each of these grid locations is tested for manufacturing defects by automated equipment.

Those locations that are found to be defective are recorded and marked with a dot of paint (this process is referred to as "inking a die", and more modern wafer-fabrication techniques no longer require physical markings to identify defective areas). The wafer is then sawed apart to cut out the individual chips.

Those defective chips are thrown away, or recycled, while the working chips are placed into packaging and re-tested for any damage that might occur during the packaging process. Flaws on the surface of the wafers and problems during the layering/depositing process are impossible to avoid, and cause some of the individual chips to be defective.

The revenue from the remaining working chips has to pay for the entire cost of the wafer and its processing, including those discarded defective chips. Thus, the higher number of working chips or higher yield, the lower the cost of each individual chip.

In order to maximize yield, one wants to make the chips as small as possible, so that a higher number of working chips can be obtained per wafer.

Production attempts

]] Many companies attempted to develop WSI production systems in the 1970s and 1980s, but all failed. Texas Instruments and ITT Corporation both saw it as a way to develop complex pipelined microprocessors and re-enter a market where they were losing ground, but neither released any products.

Gene Amdahl also attempted to develop WSI as a method of making a supercomputer, starting Trilogy Systems in 1980 and garnering investments from Groupe Bull, Sperry Rand, and Digital Equipment Corporation, who (along with others) provided an estimated $230 million in financing. The design called for a square chip with 1200 pins on the bottom.

The effort was plagued by a series of disasters, including floods which delayed the construction of the plant and later ruined the clean-room interior. After burning through about a third of the capital with nothing to show for it, Amdahl eventually declared the idea would only work with a 99.99% yield, which would not happen for 100 years.

He used Trilogy's remaining seed capital to buy Elxsi, a maker of superminicomputers, in 1985. The Trilogy efforts were eventually ended and "became" Elxsi. In 1989 Anamartic developed a wafer-stack memory based on the technology of Ivor Catt, but the company was unable to ensure a large enough supply of silicon wafers and folded in 1992.

"Giant microcircuits for superfast computers", Jim Schefter, Popular Science, January 1984, pp 66–67, 155

Text derived from https://en.wikipedia.org/w/index.php?oldid=1375107850 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

12 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.