Wafering

Wafering is the process by which a silicon crystal (boule) is made into wafers.

Uses your system voice; voice and rate in settings.

Snapshot

≈ 2 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

Wafering is the process by which a silicon crystal (boule) is made into wafers. This process is usually carried out by a multi-wire saw which cuts multiple wafers from the same crystal at the same time. These wafers are then polished to the desired degree of flatness and thickness.

In the past, conventional circular saws were used during the 1950s and 1960s, followed by inner diameter saws in the 1970s and 1980s. These saws had diamond particles embedded into their blades to cut silicon. Multi-wire saws were introduced during the early 2000s. The motivation behind this evolution was to reduce material losses from the saw's kerf, and to improve wafer's surface quality, flatness, and bow.

See also

Wafer (electronics) Monocrystalline silicon

How Silicon Chips Are Made - How Silicon Chips Are Made article on TechRadar Wafering - By SolarWorld USA Silicon Wafer Fabrication Process - By the Department of Electrical and Computer Engineering, Brigham Young University

Text derived from https://en.wikipedia.org/w/index.php?oldid=877832624 under CC BY-SA 4.0; modifications have been made.

Provenance

snapshot enwiki-000877832624 · captured 1547178664.0 · version history

Cite this page as: encyclopegia.org, “Wafering”, snapshot enwiki-000877832624. https://encyclopegia.org/a/wafering

Sources cited in this revision

No external citation was extracted for this revision. That is a statement about the source, not a claim that none exists.