Lesson plan

Wagner model

Wagner model is a rheological model developed for the prediction of the viscoelastic properties of polymers. It might be considered as a simplified practical form of the Bernstein-Kearsley-Zapas model. The model was developed by German rheologist Manfred Wagner. For the isothermal conditions the model can be written as: : \mathbf{\sigma}(t) = -p \mathbf{I} + \int_{-\infty}^{t} M(t-t')h(I_1,I_2)\mathbf{B}(t')\, dt' where: * \mathbf{\sigma}(t) is the Cauchy stress tensor as function of time t, *p is the pressure * \mathbf{I} is the unity tensor *M is the memory function showing, usually expressed as a sum of exponential terms for each mode of relaxation: : M(x)=\sum_{k=1}^m \frac{g_i}{\theta_i}\exp(\frac{-x}{\theta_i}) , where for each mode of the relaxation, g_i is the relaxation modulus and \theta_i is the relaxation time; * h(I_1,I_2) is the strain damping function that depends upon the first and second invariants of Finger tensor \mathbf{B} . The strain damping function is usually written as: : h(I_1,I_2)=m^*\exp(-n_1 \sqrt{I_1-3})+(1-m^*)\exp(-n_2 \sqrt{I_2-3}) , The strain hardening function equal to one, then the deformation is small and approaching zero, then the deformations are large. The Wagner equation can be used in the non-isothermal cases by applying time-temperature shift factor.

Back to article

Article summary

Wagner model is a rheological model developed for the prediction of the viscoelastic properties of polymers. It might be considered as a simplified practical form of the Bernstein-Kearsley-Zapas model. The model was developed by German rheologist Manfred Wagner. For the isothermal conditions the model can be written as: : \mathbf{\sigma}(t) = -p \mathbf{I} + \int_{-\infty}^{t} M(t-t')h(I_1,I_2)\mathbf{B}(t')\, dt' where: * \mathbf{\sigma}(t) is the Cauchy stress tensor as function of time t, *p is the pressure * \mathbf{I} is the unity tensor *M is the memory function showing, usually expressed as a sum of exponential terms for each mode of relaxation: : M(x)=\sum_{k=1}^m \frac{g_i}{\theta_i}\exp(\frac{-x}{\theta_i}) , where for each mode of the relaxation, g_i is the relaxation modulus and \theta_i is the relaxation time; * h(I_1,I_2) is the strain damping function that depends upon the first and second invariants of Finger tensor \mathbf{B} . The strain damping function is usually written as: : h(I_1,I_2)=m^*\exp(-n_1 \sqrt{I_1-3})+(1-m^*)\exp(-n_2 \sqrt{I_2-3}) , The strain hardening function equal to one, then the deformation is small and approaching zero, then the deformations are large. The Wagner equation can be used in the non-isothermal cases by applying time-temperature shift factor.

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.