Wake Shield Facility

science platform carried on three Space Shuttle missions

Uses your system voice; voice and rate in settings.

Q3565229Snapshot

≈ 5 min read

Names in other languages

  • DeutschWake Shield Facility
  • EnglishWake Shield Facility
  • FrançaisWake Shield Facility
  • PolskiWake Shield Facility
  • PortuguêsWake Shield Facility
  • 日本語航跡保護設備

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

Wake Shield Facility (WSF) was a NASA experimental science platform that was placed in low Earth orbit by the Space Shuttle. It was a diameter, free-flying stainless steel disk. The WSF was deployed using the Space Shuttle's Canadarm.

The WSF then used nitrogen gas thrusters to position itself about behind the Space Shuttle, which was at an orbital altitude of over , within the thermosphere, where the atmosphere is exceedingly tenuous. The WSF's orbital speed was at least three to four times faster than the speed of thermospheric gas molecules in the area, which resulted in a cone behind the WSF that was entirely free of gas molecules.

The WSF thus created an ultrahigh vacuum in its wake. The resulting vacuum was used to study epitaxial film growth. The WSF operated at a distance from the Space Shuttle to avoid contamination from the Shuttle's rocket thrusters and water dumped overboard from the Shuttle's Waste Collection System (space toilet).

After two days, the Space Shuttle would rendezvous with the WSF and again use its robotic arm to collect the WSF and to store it in the Shuttle's payload bay for return to Earth. The WSF was flown into space three times, aboard Shuttle flights STS-60 (WSF-1), STS-69 (WSF-2) and STS-80 (WSF-3).

During STS-60, some hardware issues were experienced, and, as a result, the WSF-1 was only deployed at the end of the Shuttle's Canadarm.…

Wake Shield Facility (WSF) was a NASA experimental science platform that was placed in low Earth orbit by the Space Shuttle. It was a diameter, free-flying stainless steel disk. The WSF was deployed using the Space Shuttle's Canadarm.

The WSF then used nitrogen gas thrusters to position itself about behind the Space Shuttle, which was at an orbital altitude of over , within the thermosphere, where the atmosphere is exceedingly tenuous. The WSF's orbital speed was at least three to four times faster than the speed of thermospheric gas molecules in the area, which resulted in a cone behind the WSF that was entirely free of gas molecules.

The WSF thus created an ultrahigh vacuum in its wake. The resulting vacuum was used to study epitaxial film growth. The WSF operated at a distance from the Space Shuttle to avoid contamination from the Shuttle's rocket thrusters and water dumped overboard from the Shuttle's Waste Collection System (space toilet).

After two days, the Space Shuttle would rendezvous with the WSF and again use its robotic arm to collect the WSF and to store it in the Shuttle's payload bay for return to Earth. The WSF was flown into space three times, aboard Shuttle flights STS-60 (WSF-1), STS-69 (WSF-2) and STS-80 (WSF-3).

During STS-60, some hardware issues were experienced, and, as a result, the WSF-1 was only deployed at the end of the Shuttle's Canadarm. During the later missions, the WSF was deployed as a free-flying platform in the wake of the Shuttle.

These flights proved the vacuum wake concept and realized the space epitaxy concept by growing the first-ever crystalline semiconductor thin films in the vacuum of space. These included gallium arsenide (GaAs) and aluminum gallium arsenide (AlGaAs) depositions. These experiments have been used to develop better photocells and thin films.

Among the potential resulting applications are artificial retinas made from tiny ceramic detectors. Pre-flight calculations suggested that the pressure on the wake side could be decreased by about 6 orders of magnitude over the ambient pressure in low Earth orbit (from to  Torr).

Analysis of the pressure and temperature data gathered from the two flights concluded that the decrease was about 2 orders of magnitude (4 orders of magnitude less than expected). The WSF was sponsored by the Space Processing Division in NASA's Office of Life and Microgravity Sciences and Applications.

It was designed, built and operated by the Space Vacuum Epitaxy Center, since renamed the Center for Advanced Materials, at the University of Houston, a NASA Commercial Space Center in conjunction with its industrial partner, Space Industries, Inc., also in Houston, Texas. , the Wake Shield Facility spacecraft is being preserved at the Center for Advanced Materials.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1175702101 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

2 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.