Walter Schottky

Walter Schottky ( ; 23 July 1886 – 4 March 1976) was a German physicist and electrical engineer who played a major early role in developing the theory of thermionic emission, invented the screen-grid vacuum tube in 1915, co-invented the…

Uses your system voice; voice and rate in settings.

Snapshot

≈ 5 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

Walter Schottky ( ; 23 July 1886 – 4 March 1976) was a German physicist and electrical engineer who played a major early role in developing the theory of thermionic emission, invented the screen-grid vacuum tube in 1915, co-invented the ribbon microphone and ribbon loudspeaker along with Erwin Gerlach in 1924, and later made many significant contributions in the areas of semiconductor devices, technical physics, and technology. The Schottky effect (a thermionic emission; important for vacuum tube technology), the Schottky diode (where the depletion layer occurring in it is called the Schottky barrier), the Schottky vacancies (or Schottky defects), the Schottky anomaly (a peak value of the heat capacity), and the Mott–Schottky equation (also Langmuir–Schottky space charge law) are named after him.

He conducted research on electrical noise mechanisms (shot noise), space charge, especially in electron tubes, and the barrier layer in semiconductors, which were important for the development of copper oxide rectifiers and transistors. E_{\rm int}(x) = -\frac{q^2} {16\pi\epsilon_0{x}} .

This computes the interaction energy between a point charge q and a flat metal surface, when the charge is at a distance x from the surface. Owing to the method of its derivation, this interaction is called the "image potential energy" (image PE). Schottky based his work on earlier work by Lord Kelvin relating to the image PE for a sphere.

Schottky's image PE has become a standard component in simple models of the barrier to motion, M(x), experienced by an electron on approaching a metal surface or a metal–semiconductor interface from the inside. (This M(x) is the quantity that appears when the one-dimensional, one-particle, Schrödinger equation is written in the form \frac{d^2}{dx^2} \Psi(x) = \frac{2m}{\hbar^2} M(x) \Psi(x) . ( \hbar is the reduced Planck constant, and m is the electron mass.)

The image PE is usually combined with terms relating to an applied electric field F and to the height h (in the absence of any field) of the barrier. This leads to the following expression for the dependence of the barrier energy on distance x, measured from the "electrical surface" of the metal, into the vacuum or into the semiconductor: M(x) = \; h -eFx - e^2/4 \pi \epsilon_0 \epsilon_r x \;.

Here, e is the elementary positive charge, ε 0 is the electric constant and ε r is the relative permittivity of the second medium (=1 for vacuum). In the case of a metal–semiconductor junction, this is called a Schottky barrier; in the case of the metal-vacuum interface, this is sometimes called a Schottky–Nordheim barrier.

In many contexts, h has to be taken equal to the local work function φ. This Schottky–Nordheim barrier (SN barrier) has played an important role in the theories of thermionic emission and of field electron emission. Applying the field causes lowering of the barrier, and thus enhances the emission current in thermionic emission.

This is called the "Schottky effect", and the resulting emission regime is called "Schottky emission". In 1923, Schottky suggested (incorrectly) that the experimental phenomenon then called autoelectronic emission and now called field electron emission resulted when the barrier was pulled down to zero.

In fact, the effect is due to wave-mechanical tunneling, as shown by Fowler and Nordheim in 1928. But the SN barrier has now become the standard model for the tunneling barrier. Later, in the context of semiconductor devices, it was suggested that a similar barrier should exist at the junction of a metal and a semiconductor.

Such barriers are now widely known as Schottky barriers, and considerations apply to the transfer of electrons across them that are analogous to the older considerations of how electrons are emitted from a metal into vacuum. (Basically, several emission regimes exist, for different combinations of field and temperature.

The different regimes are governed by different approximate formulae.) When the whole behaviour of such interfaces is examined, it is found that they can act (asymmetrically) as a special form of electronic diode, now called a Schottky diode. In this context, the metal–semiconductor junction is known as a "Schottky (rectifying) contact".

Reinhard W. Serchinger: Walter Schottky – Atomtheoretiker und Elektrotechniker. Sein Leben und Werk bis ins Jahr 1941. Diepholz; Stuttgart; Berlin: GNT-Verlag, 2008.

Schottky's math genealogy

Text derived from https://en.wikipedia.org/w/index.php?oldid=1372006809 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

7 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.