Washington Monument
The Washington Monument is a tall obelisk on the National Mall in Washington, D.C., built to commemorate George Washington, a Founding Father of the United States and the nation's first president.
≈ 34 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
The Washington Monument is a tall obelisk on the National Mall in Washington, D.C., built to commemorate George Washington, a Founding Father of the United States and the nation's first president. Standing east of the Reflecting Pool and the Lincoln Memorial, the monument is made of bluestone gneiss for the foundation and of granite for the construction.
The outside facing consists of three different kinds of white marble, as the building process was repeatedly interrupted. The monument stands tall, according to U.S. National Geodetic Survey measurements in 2013 and 2014. It is the third tallest monumental column in the world, trailing only the Juche Tower in Pyongyang, and the San Jacinto Monument in Houston, Texas.
It was the world's tallest structure between 1884 and 1889, after which it was overtaken by the Eiffel Tower, in Paris. Construction of the presidential memorial began in 1848. The construction was suspended from 1854 to 1877 due to funding challenges, a struggle for control over the Washington National Monument Society, and the American Civil War.
The stone structure was completed in 1884, and the internal ironwork, the knoll, and installation of memorial stones was completed in 1888.…
The Washington Monument is a tall obelisk on the National Mall in Washington, D.C., built to commemorate George Washington, a Founding Father of the United States and the nation's first president. Standing east of the Reflecting Pool and the Lincoln Memorial, the monument is made of bluestone gneiss for the foundation and of granite for the construction.
The outside facing consists of three different kinds of white marble, as the building process was repeatedly interrupted. The monument stands tall, according to U.S. National Geodetic Survey measurements in 2013 and 2014. It is the third tallest monumental column in the world, trailing only the Juche Tower in Pyongyang, and the San Jacinto Monument in Houston, Texas.
It was the world's tallest structure between 1884 and 1889, after which it was overtaken by the Eiffel Tower, in Paris. Construction of the presidential memorial began in 1848. The construction was suspended from 1854 to 1877 due to funding challenges, a struggle for control over the Washington National Monument Society, and the American Civil War.
The stone structure was completed in 1884, and the internal ironwork, the knoll, and installation of memorial stones was completed in 1888. The original design was by Robert Mills from South Carolina, but construction omitted his proposed colonnade for lack of funds, and construction proceeded instead with a bare obelisk.
The completed monument was dedicated on February 21, 1885, and opened to the public on October 9, 1888. In 2001, a temporary security screening facility was added to the entrance. Following the 2011 Virginia earthquake, the monument was closed for repairs until 2014, and it was closed again from 2016 to 2019.
The Washington Monument is a hollow Egyptian-style stone obelisk with a column surmounted by a pyramidion. The walls taper as they rise and are supported by six arches; the top of the pyramidion is a large, marble capstone with a small aluminum pyramid at its apex, with inscriptions on all four sides.
The interior is occupied by iron stairs that spiral up the walls, with an elevator in the center. The pyramidion has eight observation windows and eight red aircraft warning lights, two per side. At the northeast corner of the foundation is a marble cornerstone, including a zinc case filled with memorabilia.
Fifty U.S. flags fly on a large circle of poles centered on the monument, representing each U.S. state.
History
, –1848|left The monument was built to honor George Washington, the first president of the United States. At Washington's death in 1799, he was the unchallenged public icon of U.S. military and civic patriotism. He was also identified with the Federalist Party, which lost control of the national government in 1800 to the Jeffersonian Republicans, who were reluctant to celebrate the hero of the opposition party.
Proposals
After the American Revolutionary War, there were many proposals to build a monument to Washington, beginning with an authorization in 1783 by the old Confederation Congress to erect an equestrian statue of the general in a future U.S. national capital city. The initial proposal called for an equestrian statue.
On December 24, 1799, ten days after Washington's death, a U.S. congressional committee recommended a different type of monument. U.S. representative John Marshall proposed that a tomb be erected within the Capitol, but a lack of funds, disagreement over what type of memorial to build, and the Washington family's reluctance to move his body from Mount Vernon prevented progress on any project.
The Democratic-Republican Party (Jeffersonian Republicans) took control of Congress in 1801 and rescinded prior approvals for the memorial. Further political squabbling, along with the American Civil War, blocked the completion of the Washington Monument for much of the 19th century.
Design
Progress toward a memorial finally began in 1833, when a group of citizens formed the Washington National Monument Society. On September 23, 1835, the board of managers of the society described their expectations: In 1836, after they had raised $28,000 in donations ( ), they announced a competition for the design of the memorial. Robert Mills was formally selected in 1845.
Mills had previously designed a monument to George Washington in nearby Baltimore in 1815, and he had just been chosen Architect of Public Buildings for Washington. His design called for a circular colonnaded building in diameter and high, supporting a four-sided obelisk high, for a total height of .
A massive cylindrical pillar in diameter would support the obelisk at the center of the building. The obelisk was to be square at the base and square at the top with a slightly peaked roof. Both the obelisk and pillar were hollow within which a railway spiraled up.
The obelisk had no doorway—instead its interior was entered from the interior of the pillar upon which it was mounted. The pillar had an "arched way" at its base. The top of the portico of the building would feature Washington standing in a chariot holding the reins of six horses.
Inside the colonnade would be statues of 30 prominent Revolutionary War heroes and statues of the 56 signers of the Declaration of Independence. Criticism of Mills's design came up already in 1847, when architect Henry Robinson Searle from Rochester presented an alternative concept, backed by three objections against Mills's project: in the monument's western alcove Moreover, the estimated price tag of more than $1 million ( ) caused the society to hesitate.
On April 11, 1848, the society decided, due to a lack of funds, to build only a simple plain obelisk. Mills's 1848 obelisk was to be tall, square at the base and square at the top. It had two massive doorways, each high and wide, on the east and west sides of its base.
Surrounding each doorway were raised jambs, a heavy pediment, and entablature within which was carved an Egyptian-style winged sun and asps. This original design conformed to a massive temple which was to have surrounded the base of the obelisk, but because it was never built, the architect of the second phase of construction Thomas Lincoln Casey smoothed down the projecting jambs, pediment and entablature in 1885, walled up the west entrance with marble forming an alcove, and reduced the east entrance to high.
A statue of Washington was eventually placed in the alcove in 1994.
Construction
with the Washington Monument (in background)|left The Washington Monument was originally intended to be located at the intersection of a north–south axis through the center of the White House, and a west–east axis through the U.S. Capitol on Capitol Hill. This site had been allocated as part of the 1791 L'Enfant Plan for Washington, D.C. The ground at the intended location proved to be too unstable to support such a heavy structure, so the monument's location was moved east-southeast.
At that originally intended site there now stands a small monolith called the Jefferson Pier. Consequently, the McMillan Plan specified that the Lincoln Memorial should be "placed on the main axis of the Capitol and the Monument", about 1° south of due west of the Capitol or the monument, not due west of the Capitol or the monument.
Excavation and initial construction
The cornerstone was laid with great ceremony on July 4, 1848. The ceremony began with a parade of dignitaries in carriages, marching troops, fire companies, and benevolent societies. A long oration was delivered by Robert C. Winthrop, the speaker of the House of Representatives.
Subsequently, workers excavated the site, laid the cornerstone on the prepared bed, and laid the original foundation around and on top of the cornerstone. Construction of its massive walls began in 1849.
Regarding modern claims of slave labor being used in construction, Washington Monument historian John Steele Gordon stated "I can't say for certain, but the stonemasonry was pretty highly skilled, so it's unlikely that slaves would've been doing it. The stones were cut by stonecutters, which is highly skilled work; and the stones were hoisted by means of steam engines, so you'd need a skilled engineer and foreman for stuff like that.
Tending the steam engine, building the cast-iron staircase inside—that wasn't grunt work. ... The early quarries were in Maryland, so slave labor was undoubtedly used to quarry and haul the stone". Abraham Riesman, who quoted Gordon, states "there were plenty of people who worked as skilled laborers while enslaved in antebellum America.
Indeed, there were enslaved people who worked as stonemasons. So the possibility remains that there were slaves who performed some of the necessary skilled labor for the monument."
According to historian Jesse Holland, it is very likely that African American slaves were among the construction workers, given that slavery prevailed in Washington and its surrounding states at that time, and slaves were commonly used in public and private construction. During the second phase, it is unlikely that slave labor was used, as every stone laid required dressing and polishing by a skilled stonemason.
This includes the iron staircase which was constructed 1885–86. That the stonecutters in the quarry were slaves is confirmed because all quarry workers were slaves during the construction of the United States Capitol during the 1790s. However, most of the first phase's construction only required unskilled manual labor.
No information survives concerning the method used to lift stones that weighed several tons each during the first phase, whether by a manual winch or a steam engine. The surviving information concerning slaves that built the core of the United States Capitol during the 1790s is not much help.
At the time, the District of Columbia outside of Georgetown was sparsely populated so the federal government rented slaves from their owners who were paid a fee for their slaves' normal daily labor. Any overtime for Sundays, holidays, and nights was paid directly to the slaves which they could use for daily needs or to save to buy their freedom.
Conversely, the first phase of the monument was constructed by a private entity, the Washington National Monument Society. Only a small number of stones used in the first phase required a skilled stonemason.
These were the marble blocks on the outer surface of the monument (their inner surfaces were left very rough) and those gneiss stones that form the rough inner walls of the monument (all other surfaces of those inner stones within the walls were left jagged). The vast majority of all gneiss stones laid during the first phase, those between the outer and inner surfaces of the walls, from very large to very small jagged stones, form a pile of rubble held together by a large amount of mortar.
The original foundation below the walls was made of layered gneiss rubble, but without the massive stones used within the walls. Most of the gneiss stones used during the first phase were obtained from quarries in the upper Potomac River Valley.
Almost all the marble stones of the first and second phases was Cockeysville Marble, obtained from quarries north of downtown Baltimore in rural Baltimore County where stone for their first Washington Monument was obtained. On Independence Day, July 4, 1848, the Freemasons, the same organization to which Washington belonged, laid the cornerstone (symbolically, not physically).
According to Joseph R. Chandler: Two years later, on July 4, 1850, George Washington Parke Custis, the adopted son of George Washington, dedicated a stone from the people of the District of Columbia to the Monument at a ceremony.
Donations run out
, Construction continued until 1854, when donations ran out and the monument had reached a height of . At that time a memorial stone that was contributed by Pope Pius IX, called the Pope's Stone, was destroyed by members of the anti-Catholic, nativist American Party, better known as the "Know-Nothings", during the early morning hours of (a priest replaced it in 1982 using the Latin phrase "A Roma Americae" instead of the original stone's English phrase "Rome to America").
Economic and political conditions of the time caused public contributions to the Washington National Monument Society to cease, so they appealed to Congress for money. The request had just reached the floor of the House of Representatives when the Know-Nothing Party seized control of the society on February 22, 1855, a year after construction funds ran out.
Congress immediately tabled its expected contribution of $200,000 to the society, effectively halting the Federal appropriation. During its tenure, the Know-Nothing Society added only two courses of masonry, or , to the monument using rejected masonry it found on site, increasing the height of the shaft to .
The original society refused to recognize the takeover, so the two rival societies existed side by side until 1858. With the Know-Nothing Party disintegrating and unable to secure contributions for the monument, it surrendered its possession of the monument to the original society three and a half years later on .
To prevent future takeovers, the U.S. Congress incorporated the society on , with a stated charter and set of rules and procedures.
Post–Civil War
The American Civil War (1861–1865) halted all work on the monument, but interest grew after the war's end. Engineers studied the foundation several times to determine if it was strong enough for continued construction after 20 years of effective inactivity.
In 1876, the American Centennial of the Declaration of Independence, Congress agreed to appropriate another $200,000 to resume construction. Before work could begin again, arguments about the most appropriate design resumed. Many people thought a simple obelisk, one without the colonnade, would be too bare.
Architect Mills was reputed to have said omitting the colonnade would make the monument look like "a stalk of asparagus"; another critic said it offered "little ... to be proud of". This attitude led people to submit alternative designs. Both the Washington National Monument Society and Congress held discussions about how the monument should be finished.
The society considered five new designs and an anonymous "interesting project of California" (which later turned out to be by Arthur Frank Mathews), concluding that the one by William Wetmore Story, seemed "vastly superior in artistic taste and beauty". Congress deliberated over those five proposals (among others by Paul Schulze and John Fraser) as well as Mills's original.
While it was deciding, it ordered work on the obelisk to continue. Finally, the members of the society agreed to abandon the colonnade and alter the obelisk so it conformed to classical Egyptian proportions.
Resumption
Construction resumed in 1879 under the direction of Lieutenant Colonel Thomas Lincoln Casey of the United States Army Corps of Engineers. Casey redesigned the foundation, strengthening it so it could support a structure that ultimately weighed more than 40,000 tons ( ).
The first stone atop the unfinished stump was laid on August 7, 1880, in a small ceremony attended by President Rutherford B. Hayes, Casey and a few others. Casey found 92 memorial stones ("presented stones") already inlaid into the interior walls of the first phase of construction.
Before construction continued he temporarily removed eight stones at the level so that the walls at that level could be sloped outward, producing thinner second-phase walls. He inserted those stones and most of the remaining memorial stones stored in the lapidarium into the interior walls during 1885–1889.
The bottom third of the monument is a slightly lighter shade than the rest of the construction because the marble was obtained from different quarries. The building of the monument proceeded quickly after Congress had provided sufficient funding. In four years, it was completed, with the 100-ounce (2.83 kg) aluminum apex/lightning-rod being put in place on December 6, 1884.
The apex was the largest single piece of aluminum cast at the time, when aluminum commanded a price comparable to silver. Two years later, the Hall–Héroult process made aluminum easier to produce and the price of aluminum plummeted, though it should have provided a lustrous, non-rusting apex. The monument opened to the public on October 9, 1888.
Dedication
The monument was dedicated on February 21, 1885. Over 800 people were present on the monument grounds to hear speeches by Ohio senator John Sherman, the Rev. Henderson Suter, William Wilson Corcoran of the Washington National Monument Society (read by James C. Welling), Freemason Myron M. Parker, Col. Thomas Lincoln Casey of the Army Corps of Engineers, and President Chester A. Arthur.
President Arthur proclaimed: I do now ... in behalf of the people, receive this monument ... and declare it dedicated from this time forth to the immortal name and memory of George Washington. After the speeches, Lieutenant-General Philip Sheridan led a procession past the White House, via Pennsylvania Avenue to the east main entrance of the Capitol Building, where U.S. representative John Davis Long read a speech written a few months earlier by Robert C. Winthrop.
A final speech was given by U.S. senator John W. Daniel. The festivities concluded that evening with fireworks, both aerial and ground displays. The total cost of the monument from 1848 to 1888 was $1,409,500 ( ).
Later history
and Northern Washington from the top of the Washington Monument in the early 1900s The Washington Monument was the world's tallest structure until the Eiffel Tower in Paris was completed in 1889. This monument is taller than the obelisks around the capitals of Europe and in Egypt and Ethiopia, but ordinary antique obelisks were quarried as a monolithic block of stone, and were therefore seldom taller than approximately .
The district's Heights of Buildings Act of 1910 restricts new building heights to no more than greater than the width of the adjacent street; as such, none of Washington, D.C.'s tallest buildings are higher than the Washington Monument.
2010s to present
was projected on the Washington Monument in January 2026 during the United States Semiquincentennial celebrations. On August 23, 2011, the Washington Monument sustained damage during the 5.8 magnitude 2011 Virginia earthquake. Over 150 cracks were found in the monument, which was closed indefinitely after a crack was found at the pinnacle.
Other pieces of the monument became dislodged. Two structural engineering firms—Wiss, Janney, Elstner Associates, Inc. and Tipping Mar Associates—were hired to assess the monument. An examination of the monument's exterior revealed debris had become dislodged around and inside the memorial.
The elevator system had been damaged operating only to the level, but was soon repaired. A group of climbers conducted further investigations that September because the NPS suspected that there were more cracks on the monument's upper section that were not visible from the inside.
The external inspection found cracks and spalling near the top of the monument, and more loss of joint mortar further down the monument. The full report was issued in December 2011. More than $200,000 was spent between August 24 and September 26 inspecting the structure.
Bob Vogel, Superintendent of the National Mall and Memorial Parks, emphasized that the monument was not in danger of collapse. The NPS announced in 2012 that the monument would be closed for repairs until 2014, hiring Hill International and Louis Berger Group to provide coordination between the designer, Wiss, Janney, and Elstner Associates, the general contractor Perini, and numerous stakeholders.
NPS said a portion of the plaza at the base of the monument would be removed and scaffolding constructed around the exterior. Some stone pieces saved during the 2011 inspection would be refastened to the monument, while "Dutchman patches" would be used in other places.
Several of the stone lips that help hold the pyramidion's exterior slabs in place were also damaged, so engineers installed stainless steel brackets to more securely fasten them to the monument. The National Park Service reopened the Washington Monument to visitors on May 12, 2014, eight days ahead of schedule.
Repairs to the monument cost $15 million, with taxpayers funding $7.5 million of the cost and David Rubenstein funding the other $7.5 million. The monument continued to be plagued by problems after the earthquake, including in January 2017 when the lights illuminating it went out. The monument was closed again in September 2016 due to reliability issues with the elevator system.
On December 2, 2016, the PS announced that the monument would be closed until 2019 in order to modernize the elevator. The $2–3 million project was to correct the elevator's ongoing mechanical, electrical and computer issues, which had shuttered the monument since August 17. The NPS also requested funding for a permanent screening facility for the Washington Monument.
The final months of closure were for mitigation of possibly contaminated underground soil thought to have been introduced in the 1880s. The monument reopened September 19, 2019. The Washington Monument was closed on March 14, 2020, because of the COVID-19 pandemic. It reopened on October 1, 2020, and remained open through the remainder of that year, except for brief closures.
On January 11, 2021, a few days after the January 6 United States Capitol attack, the National Park Service announced a two-week closure until after the presidential inauguration; despite a lack of violence, the closure was extended due to a revival of COVID-19 fears. The monument then reopened on July 14, 2021, only to close yet again on August 16 for two weeks due to lightning strikes which damaged some electrical systems.
As part of the United States Semiquincentennial celebrations leading in to 2026, a projection show ran for six nights starting on December 31, 2025. Stories about how America was discovered, its independence, and future were projected on the sides of the Washington Monument.
Foundation
The first phase began with the excavation of about of topsoil down to a level of loam, consisting of equal parts of sand and clay, hard enough to require picks to break it up. On this "bed of the foundation" the cornerstone was laid at the northeast corner of the proposed foundation.
The rest of the foundation was then constructed of bluestone gneiss rubble and spalls, with every crevice filled with lime mortar. The dimensions of this old foundation were high, square at the base, and square at the top, laid down in eight steps, similar to a truncated step pyramid.
At the center of the foundation a brick-lined square well was dug to a depth of below the bed of the foundation to keep it dry and to supply water during construction. During the second phase, after determining that the proposed weight of the monument was too great for the old foundation to safely bear, the thickness of the walls atop the unfinished stump was reduced and the foundation was strengthened by adding a large unreinforced concrete slab below the perimeter of the old foundation to increase the monument's load bearing area two and one half times.
The slab was thick, with an outer perimeter square, an inner perimeter square, with undisturbed loam inside the inner perimeter except for the water well. The area at the base of the second phase foundation is .
The strengthened foundation (old foundation and concrete slab) has a total depth of below the bottom of the lowest course of marble blocks (now below ground), and below the entry lobby floor. Casey reported that nowhere did the load exceed and did not exceed near the outer perimeter.
To properly distribute the load from the shaft to slab, about half by volume of the outer periphery of the old rubble foundation below its top step was removed. A continuous sloping unreinforced concrete buttress encircles what remains. The buttress is square at its base, square at its top, and high.
The perimeter of the original top step of the old rubble foundation rests on the larger top of the concrete buttress. Its slope (lower external angle from the vertical) is 49°. This buttress rests in a depression (triangular cross-section) on the top surface of the concrete slab.
The slab was constructed by digging pairs of wide drifts on opposite sides of the monument's center line to keep the monument properly balanced. The drifts were filled with unreinforced concrete with depressions or dowel stones on their sides to interlock the sections. The weight of the foundation is .
Cornerstone
The cornerstone was laid at the northeast corner of the lowest course of the old foundation on . Therefore, the cornerstone was laid below the 1848 ground level. In 1880, the ground level was raised .
If the cornerstone had not been moved during the strengthening of the foundation in 1879–80, its upper surface would now be below the pavement just outside the northeast corner of the shaft. It would now be sandwiched between the concrete slab under the old foundation and the concrete buttress completely encircling what remains of the old foundation.
During the strengthening process, about half by volume of the periphery of the lowest seven of eight courses or steps of the old foundation (gneiss rubble) was removed to provide good footing for the buttress. Although a few diagrams, pictures and descriptions of this process exist, the fate of the cornerstone is not mentioned.
The cornerstone was a marble block high and square with a large hole for a zinc case filled with memorabilia. The hole was covered by a copper plate inscribed with the date of the Declaration of Independence (July 4, 1776), the date the cornerstone was laid (July 4, 1848), and the names of the managers of the Washington National Monument Society.
The memorabilia in the zinc case included items associated with the monument, the city of Washington, the national government, state governments, benevolent societies, and George Washington, plus miscellaneous publications, both governmental and commercial, a coin set, and a Bible, totaling 73 items or collections of items, as well as 71 newspapers containing articles relating to George Washington or the monument.
Memorial stones
, representing the former provisional State of Deseret States, cities, foreign countries, benevolent societies, other organizations, and individuals have contributed 194 memorial stones, all inserted into the east and west interior walls above stair landings or levels for easy viewing, except one on the south interior wall between stairs that is difficult to view. The sources disagree on the number of stones for two reasons: whether one or both "height stones" are included, and stones not yet on display at the time of a source's publication cannot be included.
The "height stones" refer to two stones that indicate height: during the first phase of construction a stone with an inscription that includes the phrase "from the foundation to this height 100 feet" ( ) was installed just below the stairway and high above the stairway; during the second phase of construction a stone with a horizontal line and the phrase "top of statue on Capitol" was installed on the level. The Historic Structure Report (HSR, 2004) named 194 "memorial stones" by level, including both height stones.
Jacob (2005) described in detail and pictured 193 "commemorative stones", including the stone but not the Capitol stone. The Historic American Buildings Survey (HABS, 1994) showed the location of 193 "memorial stones" but did not describe or name any. HABS showed both height stones but did not show one stone not yet installed in 1994.
Olszewski (1971) named 190 "memorial stones" by level, including the Capitol stone but not the 100-foot stone. Olszewski did not include three stones not yet installed in 1971. Of 194 stones, 94 are marble, 40 are granite, 29 are limestone, 8 are sandstone, with 23 miscellaneous types, including stones with two types of material and those whose materials are not identified.
Unusual materials include native copper (Michigan), pipestone (Minnesota), petrified wood (Arizona), and jadeite (Alaska). The stones vary in size from about square (Carthage) to about (Philadelphia and New York City).
Walls
The bottom section of was built between 1848 and 1854 under the direction of William Dougherty. It uses white Cockeysville Marble from the Texas Quarry, a still-active quarry in Cockeysville, Maryland. During the second phase in 1879–1880, eight feet of white marble from Sheffield, Massachusetts, were laid above the "Texas" marble; this was halted due to quality control problems.
The third and final phase of is marble from the Beaver Dam quarry adjacent to the Texas quarry (1880–1884). The marble here was a warmer shade than the starker white of the Texas quarry. The three different shades of marble can be distinguished on the monument.
Engineers used three different systems to measure the monument's levels. The height of the marble walls was measured in increments, the pyramid-shaped top was measured in increments, and the stair landings were marked in increments.
Complicating matters, the starting "zero point" for the staircase was different from the one used for the walls, and these references even shifted slightly when construction resumed for the second phase. Since there was a long hiatus between the first phase and the last two phases, the monument has a complex superstructure.
Around the level, the inner walls slope slightly outward, causing the hollow shaft inside to widen from about square to over square. Above this level, the monument's upper section has thinner walls. The lowest part of the upper section has walls measuring thick, which featured distinctively rounded corners; these walls gradually tapered to thick at the top.
The weight of this upper portion alone is . In total, the monument's interior walls rise to a height of just over . During the first phase of construction, the monument's walls were built with a less refined technique.
While the outer surface is made of thick marble stones arranged in rows, the core of the walls was filled with a random assortment of bluestone rubble, all held together by mortar. At its base, this first section is square with massive walls, and this lower portion alone weighs nearly .
During the second phase, engineers used precisely cut blocks of marble and granite laid in an orderly, interlocking pattern with thick, stable joints. For strength, the marble exterior was initially backed-filled by granite blocks.
As the monument rose, the builders gradually transitioned to using marble for the interior as well, until the structure above the level was made entirely of solid marble blocks.
Stairs and elevator
The monument is filled with ironwork, consisting of its stairs, elevator columns and associated tie beams, none of which supports the weight of the stonework. It was redesigned in 1958 to reduce congestion and improve the flow of visitors. Originally, visitors entered and exited the west side of the elevator on the observation floor, causing congestion.
So the large landing at the 490-foot level was expanded to a full floor and the original spiral stair in the northeast corner between the levels was replaced by two spiral stairs in the northeast and southeast corners. Now visitors exit the elevator on the observation floor, then walk down either spiral stair before reboarding the elevator for their trip back down.
The main stairs spiral up the interior walls from the entry lobby floor to the elevator reboarding floor at the level. The elevator occupies the center of the shaft well from the entry lobby to the observation floor, with an elevator machine room (installed 1925–26) whose floor is above the observation floor and an elevator pit (excavated 1879) whose floor is below the entry lobby floor.
The stairs and elevator are supported by four wrought iron columns each. The four supporting the stairs extend from the entry lobby floor to the observation floor and were set at the corners of a square. The four supporting the elevator extend from the floor of the elevator pit to above the observation floor and were set at the corners of a square.
The weight of the ironwork is . Cast iron, wrought iron, and steel were all used. The two small spiral stairs installed in 1958 are aluminum.
Most landings occupy the entire east and west interior walls every from and including the east landing at the level up to the west landing at the level, east then west alternately. Three stairs with small landings rise from the entry lobby floor to the level successively along the north, west and south interior walls.
Landings from the level up to the level are by , while landings from the level to the level are by . All stairs are on the north and south walls except for the aforementioned west stair between the levels, and the two spiral stairs. About one quarter of visitors chose to ascend the monument using the stairs when they were available.
They were closed to up traffic in 1971, and then closed to all traffic except by special arrangement in 1976. The stairs had 898 steps until 1958, consisting of 18 risers in each of the 49 main stairs plus 16 risers in the spiral stair. Since 1958 the stairs have had 897 risers if only one spiral stair is counted because both spiral stairs now have 15 risers each.
These figures do not include two additional steps in the entry passage that were covered up in 1975 by a ramp and its inward horizontal extension to meet the higher (since 1886) entry lobby floor. One step was away from the outer walls and the other was at the end of the passage, away from the outer walls.
As initially constructed, the interior was relatively open with two-rail handrails, but a couple of suicides and an accidental fall prompted the addition of tall wire screening high with a large diamond mesh on the inside edge of the stairs and landings in 1929. The original steam powered elevator, which took 10 to 12 minutes to ascend to the observation floor, was replaced by an electric elevator powered by an on-site dynamo in 1901 which took five minutes to ascend.
The monument was connected to the electrical grid in 1923, allowing the installation of a modern electric elevator in 1925–26 which took 70 seconds. The latter was replaced in 1958 and again in 1998 by 70-second elevators.
From 1997 to 2000, the wire screening at three platforms was replaced by large glass panels to allow visitors on the elevator to view three clusters of memorial stones that were synchronously lit as the elevator automatically slowed while passing them during its descent.
Miscellaneous details
The weight of the above ground portion of the monument is , whereas its total weight, including the foundation below ground and any earth above it that is within its outer perimeter is . The total number of blocks in the monument, including all marble, granite and gneiss blocks, whether externally or internally visible or hidden from view within the walls or old foundation is over 36,000.
Flags
Fifty U.S. national flags, one representing each state, are flown 24 hours a day around a large circle centered on the monument. Forty-eight American flags (one for each state then in existence) were flown on wooden flag poles on Washington's birthday since 1920 and later on Independence Day, Memorial Day, and other special occasions until early 1958.
Both the flags and flag poles were removed and stored between these days. In 1958 fifty tall aluminum flag poles (anticipating Alaska and Hawaii) were installed, evenly spaced around a diameter circle. During 2004–05, the diameter of the circle was reduced to .
Since Washington's birthday in 1958, 48 U.S. flags were flown on a daily basis, increasing to 49 flags on , and then to 50 flags since . When fewer than 50 flags were flown, only the flag poles in use were placed into base receptacles, and all flags were removed and stored overnight. Since , fifty U.S. flags have flown 24 hours a day.
Security
wall surrounds the monument. In 2001, a temporary visitor security screening center a one-story cube of wood around a metal frame was added to the east entrance of the Washington Monument in the wake of the September 11 attacks. Visitors passed through metal detectors and bomb-sniffing sensors prior to entering the monument.
In 2019 a new two-story screening facility opened. Its exterior walls are slightly frosted, consisting of an outer sheet of bulletproof glass or polycarbonate, a metal mesh insert, and another sheet of bulletproof glass. The inner sheet consists of two sheets of laminated glass; a airspace between the inner and outer glass walls provides thermal insultion.
Geothermal heat pumps on the north side of the monument heat and cool the facility. The new facility also incorporates a staff office. The structure is designed such that it can be removed without damage to the monument.
A recessed trench wall known as a ha-ha has been built to minimize the visual impact of a security barrier surrounding the monument. After the September 11 attacks and another unrelated threat at the monument, authorities had put up a circle of temporary Jersey barriers to block the approach of vehicles.
This barrier was replaced by a low granite stone wall that doubles as a bench and also incorporates lighting. Designed by the famed landscape architect Laurie Olin, the installation received the 2005 Park/Landscape Award of Merit from the American Society of Landscape Architects.
Replicas
In Ridgeland, Mississippi, off Interstate 55 at the corner of Colony Park Boulevard and Highland Colony Parkway, is a tall cellphone tower in the shape of the Washington Monument. Other replicas or close resemblances include those at the Jefferson Davis State Historic Site in Fairview, Kentucky, at ; Olalla, Washington, at ; and another in an office park in Alexandria, Virginia, at .
A high model is under a manhole near the Washington Monument and serves as a geodetic marker in a national geodetic control network.
See also
List of national memorials of the United States List of public art in Washington, D.C., Ward 2 List of tallest freestanding structures
Text derived from https://en.wikipedia.org/w/index.php?oldid=1377686994 under CC BY-SA 4.0; modifications have been made.