Waste input-output model

The Waste Input-Output (WIO) model is an innovative extension of the environmentally extended input-output (EEIO) model.

Uses your system voice; voice and rate in settings.

Snapshot

≈ 6 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

The Waste Input-Output (WIO) model is an innovative extension of the environmentally extended input-output (EEIO) model. It enhances the traditional Input-Output (IO) model by incorporating physical waste flows generated and treated alongside monetary flows of products and services.

In a WIO model, each waste flow is traced from its generation to its treatment, facilitated by an allocation matrix. Additionally, the model accounts for the transformation of waste during treatment into secondary waste and residues, as well as recycling and final disposal processes.

By including the end-of-life (EoL) stage of products, the WIO model enables a comprehensive consideration of the entire product life cycle, encompassing production, use, and disposal stages within the IO analysis framework. As such, it serves as a valuable tool for life cycle assessment (LCA).

W_{P} : an n_{W} \times n_P matrix representing the net flow of wastes: W_{P}=W^{+}_{P}-W^{-}_{P} . Z_{T} : an n_W \times n_T matrix representing the flow of products in waste treatment sectors.

W_T : an n_W \times n_T matrix representing the net generation of (secondary) waste in waste treatment sectors: W_{T}=W^{+}_{T}-W^{-}_{T} ( W^{+}_T and W^{-}_T are defined similar to W^{+}_{P} and W^{-}_P ). Typical examples of W^{+}_{T} include ashes generated from incineration processes, sludge produced during wastewater treatment, and residues derived from automobile shredding facilities. y_{P} : an n_P \times 1 vector representing the final demand for products. w_{Y} : an n_W \times 1 vector representing the generation of waste from final demand sectors, such as the generation of kitchen waste and end-of-life consumer appliances. x_{P} : an n_P \times 1 vector representing the quantity of n_{P} products produced. w : an n_W \times 1 vector representing the quantity of n_{w} waste for treatment. Variables with Z or x pertain to conventional components found in an IO table and are measured in monetary units.

Conversely, variables with W or w typically do not appear explicitly in an IO table and are measured in physical units. A_{P} = Z_{P} \hat{x}_{P}^{-1}, A_{T} = Z_{T} \hat{x}_{T}^{-1}, G_{P} = W_{P} \hat{x}_{P}^{-1}, G_{T} = W_{T} \hat{x}_{T}^{-1}. \end{align} Here, \hat{v} refers to a diagonal matrix where the (i, i) element is the i -th element of a vector v . Using A and G as derived above, the balance ( ) can be represented as: This equation ( ) represents the Duchin-Leontief environmental IO model, an extension of the original Leontief model of pollution abatement to account for the generation of secondary waste.

This system of equations is generally unsolvable due to the presence of x_{T} on the left-hand side and w on the right-hand side, resulting in asymmetry. This asymmetry poses a challenge for solving the equation.

However, the Duchin-Leontief environmental IO model addresses this issue by introducing a simplifying assumption: This assumption ( ) implies that a single treatment sector exclusively treats each waste. For instance, waste plastics are either landfilled or incinerated but not both simultaneously.

While this assumption simplifies the model and enhances computational feasibility, it may not fully capture the complexities of real-world waste management scenarios. In reality, various treatment methods can be applied to a given waste; for example, organic waste might be landfilled, incinerated, or composted.

Therefore, while the assumption facilitates computational tractability, it might oversimplify the actual waste management processes. {\iota_{T}}^{'} S ={ \iota_{w}}^{'}. Here, ' stands for the transpose operator.

Note that the allocation matrix S is essential for deriving x_{T} from w . The simplifying condition ( ) corresponds to the special case where n_{T}=n_{w} and S is a unit matrix. The table below gives an example of S for seven waste types and three treatment processes. Note that S represents the allocation of waste for treatment, that is, the portion of waste that is not recycled.

The application of the allocation matrix S transforms equation ( ) into the following form: Note that, different from ( ), the variable x_T occurs on both sides of the equation. This system of equations is thus solvable (provided it exists), with the solution given by: \begin{align} \begin{pmatrix} x_{P} \\ x_{T} \end{pmatrix} = \begin{pmatrix} I - A_{P} & -A_{T} \\ - S G_{P} & I - S G_{T} \end{pmatrix}^{-1} \begin{pmatrix} y_{P} \\ S w_{y} \end{pmatrix}. \end{align} The WIO counterpart of the standard EEIO model of emissions, represented by equation ( ), can be formulated as follows: Here, F_P represents emissions per output from production sectors, and F_T denotes emissions from waste treatment sectors.

Upon comparison of equation ( ) with equation ( ), it becomes clear that the former expands upon the latter by incorporating factors related to waste and waste treatment. Finally, the amount of waste for treatment induced by the final demand sector can be given by: = \begin{pmatrix} x_P \\ x_T \\ w \end{pmatrix} It is worth noting that despite the seemingly different forms of the two models, the Leontief inverse matrices of WIO and WIO-SUT are equivalent.

The case without waste recycling

In the absence of recycling, the cost counterpart of equation ( ) becomes: \begin{pmatrix} p_P & p_T \end{pmatrix} = \begin{pmatrix} p_P & p_T \end{pmatrix} \begin{pmatrix} A_P & A_T \\ SG_P & SG_T \end{pmatrix} + \begin{pmatrix} v_P & v_T \end{pmatrix} which can be solved for p_P and p_T as:

The case with waste recycling

When there is a recycling of waste, the simple representation given by equation ( ) must be extended to include the rate of recycling r and the price of waste p^W : Here, p^W is the n_w \times 1 vector of waste prices, \hat{r} is the diagonal matrix of the n_w \times vector of the average waste recycling rates, G^{+}_{P} = W^{+}_P{\hat{x_P}}^{-1} , and G^{-}_P = W^{-}_P{\hat{x_P}}^{-1} ( G^{+}_{T} and G^{-}_{T} are defined in a similar fashion). Rebitzer and Nakamura used ( ) to assess the life-cycle cost of washing machines under alternative End-of-Life scenarios.

More recently, Liao et al. applied ( ) to assess the economic effects of recycling copper waste domestically in Taiwan, amid the country's consideration of establishing a copper refinery to meet increasing demand.

WIO table compiled by the Japanese Ministry of the Environment

Text derived from https://en.wikipedia.org/w/index.php?oldid=1375486477 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

9 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.