Lesson plan

Watchclock

A watchclock is a mechanical clock used by security guards as part of their guard tour patrol system which require regular patrols. The most commonly used form was the mechanical clock systems that required a key for manual punching of a number to a strip of paper inside with the time pre-printed on it. Recently, electronic systems have increased in popularity due to their light weight, ease of use, and downloadable logging capabilities. This increase in the electronic systems led the largest U.S. manufacturer of watchclocks, Detex, to discontinue all of their mechanical watchclocks on December 31, 2011, including the Detex Newman which had been manufactured for 130 years. Watchclocks often had a paper or light cardboard disk or paper tape placed inside for a set period of time, usually 24 hours for disk models, and 96 hours for tape models. The user would carry the clock to each checkpoint where a numbered key was mounted (typically chained in place, ensuring that the user was present). That key was then inserted into the clock and turned, which would imprint the disk with the key number. The paper disk or tape had the times pre-printed and the key impressed the key number on the corresponding time.…

Back to article

Article summary

A watchclock is a mechanical clock used by security guards as part of their guard tour patrol system which require regular patrols. The most commonly used form was the mechanical clock systems that required a key for manual punching of a number to a strip of paper inside with the time pre-printed on it. Recently, electronic systems have increased in popularity due to their light weight, ease of use, and downloadable logging capabilities. This increase in the electronic systems led the largest U.S. manufacturer of watchclocks, Detex, to discontinue all of their mechanical watchclocks on December 31, 2011, including the Detex Newman which had been manufactured for 130 years. Watchclocks often had a paper or light cardboard disk or paper tape placed inside for a set period of time, usually 24 hours for disk models, and 96 hours for tape models. The user would carry the clock to each checkpoint where a numbered key was mounted (typically chained in place, ensuring that the user was present). That key was then inserted into the clock and turned, which would imprint the disk with the key number. The paper disk or tape had the times pre-printed and the key impressed the key number on the corresponding time.…

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.