Watergeus-class sloop

The Watergeus class was a class of screw sloop-of-war of the Royal Netherlands Navy.

Uses your system voice; voice and rate in settings.

Snapshot

≈ 3 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

The Watergeus class was a class of screw sloop-of-war of the Royal Netherlands Navy. The class comprised the 'Watergeus' and the Marnix. A third ship that had been planned was cancelled.

Design

The Watergeus was initially supposed to be an 'improved Reteh'. She would be laid down as a 'Schroefstoomschip 4de klasse'. Later on, it would be described as modeled on the CSS Alabama.

The dimensions of the ship support this. The length between perpendiculars of the Reteh was 45.5 m, the Watergeus 58.0 m, the Alabama 65.2m (213.8 feet). The name Watergeus gives further support to this belief.

The Geuzen were buccaneers like the crew of the Alabama. The second ship was named for Philips of Marnix, Lord of Saint-Aldegonde a person closely associated with the Geuzen. Classification of the Watergeus as a screw sloop-of-war has to do with the rigging of the ship.

In the Netherlands as well as in England, only ships with full rigging on all three masts were called ships, and the smallest of these were called corvettes. Watergeus had three masts, but with only Fore-and-aft rig on the mizzen mast. In English this made the Watergeus a sloop-of-war, the ship category right below the corvette.

Propulsion

The Watergeus class had machines of 280 nominal horsepower made by Van Vlissingen en Dudok van Heel in Amsterdam. When the Dutch shifted to using indicated horse power, the machines were measured at 770 indicated horse power. The difference is due to nominal horse power not taking steam pressure into account.

Therefore indicated horse power is a better measure. The Watergeus had a displacement of 1,405 tons as opposed to the 2,030 tons of the Djambi class. It had somewhat more power, and an equal length.

The Watergeus class attained a maximum speed of 12 knots on her trials 10 years later, in 1875 she was registered as making 10 knots maximum

Armament

The Watergeus class had fewer guns than the preceding Djambi's. However, the guns that they did have were much better. At least two guns on Watergeus were long 16 cm RML's, shooting a 100 pound bullet, placed on pivots between the masts. These long 16 cm guns had been designed especially for Watergeus by De Fremery, Head of Artillery of the Navy.

He designed the guns in March 1863, and in 1864, bronze guns of this type were commissioned from the firm of J.J. Maritz in The Hague, and steel guns of the same type from Krupp in Essen, Germany. De Fremery also commissioned a model of the gun as placed on Watergeus.

From the dimensions of this model (34 cm long, by 1.6 cm caliber) it can be pinpointed as a 16 cm No. 1, weighing 75% more than the No. 3. The four other 16 cm guns on the Watergeus were the 'Getrokken Kanon 16 cm No. 3' shooting a 60 pound bullet. These were also present on the Djambi's. Unlike the Djambi's the Watergeus class did not have classic smooth-bore guns.

Marnix was even better armed. It would get two RML 7-inch Armstrong Gun (which each weighed more than twice as much as the RML 16 cm No. 1), and two 'Getrokken Kanon 16 cm No. 3'.

Construction

Of the 3 ships planned, only the Watergeus and Marnix were finished.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1333373202 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

7 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.