{
  "id": "enwiki-001370925544",
  "slug": "waveguide",
  "title": "Waveguide",
  "qid": "",
  "lead": "that has a flange. A waveguide is a structure that guides waves by restricting the direction of transmission of energy. Common types of waveguides include acoustic waveguides which direct sound, optical waveguides which direct light, and radio-frequency waveguides which direct electromagnetic waves other than visible, or near visible, light, like radio waves. Without the physical constraint of a waveguide, waves would expand into three-dimensional space and their intensities would decrease according to the inverse square law. There are different types of waveguides for different types of waves. The original and most common meaning is a hollow conductive metal pipe used to carry high frequency radio waves, particularly microwaves. Dielectric waveguides are used at higher radio frequencies, and transparent dielectric waveguides and optical fibers serve as waveguides for light. In acoustics, air ducts and horns are used as waveguides for sound in musical instruments and loudspeakers, and specially-shaped metal rods conduct ultrasonic waves in ultrasonic machining. The geometry of a waveguide reflects its function; in addition to more common types that channel the wave in one dimension, there are two-dimensional slab waveguides which confine waves to two dimensions.…",
  "body": "that has a flange. A waveguide is a structure that guides waves by restricting the direction of transmission of energy. Common types of waveguides include acoustic waveguides which direct sound, optical waveguides which direct light, and radio-frequency waveguides which direct electromagnetic waves other than visible, or near visible, light, like radio waves. Without the physical constraint of a waveguide, waves would expand into three-dimensional space and their intensities would decrease according to the inverse square law. There are different types of waveguides for different types of waves. The original and most common meaning is a hollow conductive metal pipe used to carry high frequency radio waves, particularly microwaves. Dielectric waveguides are used at higher radio frequencies, and transparent dielectric waveguides and optical fibers serve as waveguides for light. In acoustics, air ducts and horns are used as waveguides for sound in musical instruments and loudspeakers, and specially-shaped metal rods conduct ultrasonic waves in ultrasonic machining. The geometry of a waveguide reflects its function; in addition to more common types that channel the wave in one dimension, there are two-dimensional slab waveguides which confine waves to two dimensions. The frequency of the transmitted wave also dictates the size of a waveguide: each waveguide has a cutoff wavelength determined by its size and will not conduct waves of greater wavelength; an optical fiber that guides light will not transmit microwaves which have a much larger wavelength. Some naturally occurring structures can also act as waveguides. The SOFAR channel layer in the ocean can guide the sound of whale song across enormous distances. Any shape of waveguide can support EM waves. However, irregular shapes are difficult to analyse. Commonly used waveguides are rectangular or circular in cross-section. Propagation modes are computed by solving the Helmholtz equation alongside a set of boundary conditions depending on the geometrical shape and materials bounding the region. The usual assumption for infinitely long uniform waveguides allows us to assume a propagating form for the wave, i.e. stating that every field component has a known dependency on the propagation direction (i.e. z ). More specifically, the common approach is to first replace all unknown time-varying fields u(x,y,z,t) (assuming for simplicity to describe the fields in cartesian components) with their complex phasors representation U(x,y,z) , sufficient to fully describe any infinitely long single-tone signal at frequency f , (angular frequency \\omega=2\\pi f ), and rewrite the Helmholtz equation and boundary conditions accordingly. Then, every unknown field is forced to have a form like U(x,y,z)=\\hat{U}(x,y)e^{-\\gamma z} , where the \\gamma term represents the propagation constant (still unknown) along the direction along which the waveguide extends to infinity. The Helmholtz equation can be rewritten to accommodate such form and the resulting equality needs to be solved for \\gamma and \\hat{U}(x,y) , yielding in the end an eigenvalue equation for \\gamma and a corresponding eigenfunction \\hat{U}(x,y)_\\gamma for each solution of the former. The propagation constant \\gamma of the guided wave is complex, in general. For a lossless case, the propagation constant might be found to take on either real or imaginary values, depending on the chosen solution of the eigenvalue equation and on the angular frequency \\omega . When \\gamma is purely real, the mode is said to be \"below cutoff\", since the amplitude of the field phasors tends to exponentially decrease with propagation; an imaginary \\gamma , instead, represents modes said to be \"in propagation\" or \"above cutoff\", as the complex amplitude of the phasors does not change with z . The reflection coefficient can be calculated using: \\Gamma=\\frac{Z_2-Z_1}{Z_2+Z_1} , where \\Gamma (Gamma) is the reflection coefficient (0 denotes full transmission, 1 full reflection, and 0.5 is a reflection of half the incoming voltage), Z_1 and Z_2 are the impedance of the first component (from which the wave enters) and the second component, respectively. An impedance mismatch creates a reflected wave, which added to the incoming waves creates a standing wave. An impedance mismatch can be also quantified with the standing wave ratio (SWR or VSWR for voltage), which is connected to the impedance ratio and reflection coefficient by: \\mathrm{VSWR}=\\frac {1-|\\Gamma|} , where \\left|V\\right|_{\\rm min/max} are the minimum and maximum values of the voltage absolute value, and the VSWR is the voltage standing wave ratio, which value of 1 denotes full transmission, without reflection and thus no standing wave, while very large values mean high reflection and standing wave pattern.",
  "categories": [
    "107141658",
    "130110808",
    "20265730",
    "20513515",
    "22902331",
    "23118434",
    "23603337",
    "24623845",
    "27817407",
    "28269686",
    "33889075",
    "34563876",
    "59047611"
  ],
  "license": "CC BY-SA 4.0",
  "source_uri": "https://en.wikipedia.org/w/index.php?oldid=1370925544",
  "content_hash": "",
  "created_at": null,
  "updated_at": 1787506048.0,
  "claims": [],
  "contradictions": [],
  "confidence": 0.6,
  "csl": {
    "id": "enwiki-001370925544",
    "type": "webpage",
    "title": "Waveguide",
    "author": [
      {
        "family": "Anticloud FZ LLE",
        "literal": "Anticloud FZ LLE"
      }
    ],
    "container-title": "encyclopegia.org",
    "publisher": "Anticloud FZ LLE",
    "publisher-place": "Dubai, United Arab Emirates",
    "URL": "https://encyclopegia.org/a/waveguide",
    "issued": {
      "date-parts": [
        [
          2026,
          11,
          20
        ]
      ]
    },
    "accessed": {
      "date-parts": [
        [
          2026,
          11,
          20
        ]
      ]
    },
    "license": "CC BY-SA 4.0",
    "DOI": "eo1:enwiki-001370925544",
    "isBasedOn": "https://en.wikipedia.org/w/index.php?oldid=1370925544",
    "note": "Immutable snapshot enwiki-001370925544"
  }
}