Lesson plan
Wax jack
), c. 1740 A wax jack (wax-jack, taper-jack ) is a device used to hold a taper of sealing wax intended to create sealings on documents. The wax jack was first introduced in 1700. Before that time a simple taper was used in a loose ball. Despite the resemblance to a candle, they were not used for illumination. Although common in England and Europe, they were not used much in North America. Most early wax jacks were worked by silversmiths, although later models also exist in other metals such as iron, brass or bell metal.
Article summary
), c. 1740 A wax jack (wax-jack, taper-jack ) is a device used to hold a taper of sealing wax intended to create sealings on documents. The wax jack was first introduced in 1700. Before that time a simple taper was used in a loose ball. Despite the resemblance to a candle, they were not used for illumination. Although common in England and Europe, they were not used much in North America. Most early wax jacks were worked by silversmiths, although later models also exist in other metals such as iron, brass or bell metal.
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.