Lesson plan
Well cluster
[[File:Nested well and well cluster.jpg|thumb|400px|alt=Nested well and well cluster (adapted from Johnson [1983])| Nested well and well cluster (adapted from Johnson [1983]) A well cluster, also referred to as a monitoring well cluster, consists of multiple co-located monitoring wells that are constructed with intakes (well screens) at different depths in the subsurface. The purpose of a well cluster is to provide groundwater samples from discrete depths at approximately the same location, and/or to measure the vertical pressure gradient to calculate the vertical component of groundwater flow. Water levels can be measured in each individual monitoring well, providing vertical profiles of groundwater pressure (hydraulic head). The pressure difference between the groundwater table and the potentiometric surface in a submerged well can. A shallow well is used to measure the water table, and is equilibrated to atmospheric pressure. A deeper well, or piezometer, measured the potentiometric surface, determined by the water level observed when submerged and sealed. The associated change in pressure between the shallow well and piezometer, and the corresponding length, usually taken as the distance between the center of the two well screens, can be applied to Darcy's Law to calculate the vertical groundwater flow.…
Article summary
[[File:Nested well and well cluster.jpg|thumb|400px|alt=Nested well and well cluster (adapted from Johnson [1983])| Nested well and well cluster (adapted from Johnson [1983]) A well cluster, also referred to as a monitoring well cluster, consists of multiple co-located monitoring wells that are constructed with intakes (well screens) at different depths in the subsurface. The purpose of a well cluster is to provide groundwater samples from discrete depths at approximately the same location, and/or to measure the vertical pressure gradient to calculate the vertical component of groundwater flow. Water levels can be measured in each individual monitoring well, providing vertical profiles of groundwater pressure (hydraulic head). The pressure difference between the groundwater table and the potentiometric surface in a submerged well can. A shallow well is used to measure the water table, and is equilibrated to atmospheric pressure. A deeper well, or piezometer, measured the potentiometric surface, determined by the water level observed when submerged and sealed. The associated change in pressure between the shallow well and piezometer, and the corresponding length, usually taken as the distance between the center of the two well screens, can be applied to Darcy's Law to calculate the vertical groundwater flow.…
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.