Lesson plan

Wobble frequency

Optical discs, with the exception of DVD-RAM, have their data encoded on a single spiral, or a groove, which covers the surface of the disc. In the case of recordable media, this groove is not a perfect spiral and contains a slight sinusoidal deviation (wobble) from a perfect spiral. The period of this sine curve corresponds to the wobble frequency. The wobble frequency is commonly used as a synchronization source to achieve constant linear velocity while writing a disc, but has other uses as well depending on the type of disc. The frequencies quoted all assume that the disc is being written at the '1x' speed. The frequencies are appropriately higher for faster writing speeds. CD-R and CD-RW discs use a frequency modulated wobble with a wobble frequency of 22.05 kHz to encode information, such as the Absolute Time in Pregroove (ATIP), into the groove. DVD-R and DVD-RW have a constant wobble frequency of 140.6 kHz relying on data 'pits' beside the groove to convey information (Land pre-pit). DVD+R and DVD+RW have a constant wobble frequency of 817.4 kHz, but encodes its addressing information by periodically inverting the phase of the wobble signal (bi-phase modulation) to encode an exact address of the location on the spiral track (Address in Pregroove).…

Back to article

Article summary

Optical discs, with the exception of DVD-RAM, have their data encoded on a single spiral, or a groove, which covers the surface of the disc. In the case of recordable media, this groove is not a perfect spiral and contains a slight sinusoidal deviation (wobble) from a perfect spiral. The period of this sine curve corresponds to the wobble frequency. The wobble frequency is commonly used as a synchronization source to achieve constant linear velocity while writing a disc, but has other uses as well depending on the type of disc. The frequencies quoted all assume that the disc is being written at the '1x' speed. The frequencies are appropriately higher for faster writing speeds. CD-R and CD-RW discs use a frequency modulated wobble with a wobble frequency of 22.05 kHz to encode information, such as the Absolute Time in Pregroove (ATIP), into the groove. DVD-R and DVD-RW have a constant wobble frequency of 140.6 kHz relying on data 'pits' beside the groove to convey information (Land pre-pit). DVD+R and DVD+RW have a constant wobble frequency of 817.4 kHz, but encodes its addressing information by periodically inverting the phase of the wobble signal (bi-phase modulation) to encode an exact address of the location on the spiral track (Address in Pregroove).…

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.