Lesson plan
Worklight
can also be used for worklights In theater, a worklight is a high-intensity light fixture which is used to illuminate the stage for the benefit of technicians. Technicians use these lights, rather than the stage lights for a number of reasons. Firstly, it takes much less technical knowledge to turn on worklights, so even people with no knowledge of electrics can turn them on. Secondly, regardless of the lights hung for the specific show, they provide fairly consistent and complete lighting. Finally, and most importantly, they are designed to be cheap and easy to re-lamp, in contrast to theatrical fixtures, which have expensive lamps and would burn through color gels if used to illuminate stage work. Worklights are not designed to light the stage in an aesthetically pleasing way, but rather to be efficient in terms of space and heat; however, they may occasionally be used to emphasize plot elements during a show. They are generally near-white. Worklights are usually placed on catwalks and battens, or can be permanently built in. If not hardwired into the control system, the connectors are often marked or attached in a way to prevent them from mistakenly being removed during a strike/load out. Worklights can also be used during performances and rehearsals, to provide dim lighting for technicians backstage.
Article summary
can also be used for worklights In theater, a worklight is a high-intensity light fixture which is used to illuminate the stage for the benefit of technicians. Technicians use these lights, rather than the stage lights for a number of reasons. Firstly, it takes much less technical knowledge to turn on worklights, so even people with no knowledge of electrics can turn them on. Secondly, regardless of the lights hung for the specific show, they provide fairly consistent and complete lighting. Finally, and most importantly, they are designed to be cheap and easy to re-lamp, in contrast to theatrical fixtures, which have expensive lamps and would burn through color gels if used to illuminate stage work. Worklights are not designed to light the stage in an aesthetically pleasing way, but rather to be efficient in terms of space and heat; however, they may occasionally be used to emphasize plot elements during a show. They are generally near-white. Worklights are usually placed on catwalks and battens, or can be permanently built in. If not hardwired into the control system, the connectors are often marked or attached in a way to prevent them from mistakenly being removed during a strike/load out. Worklights can also be used during performances and rehearsals, to provide dim lighting for technicians backstage.
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.