WREL (technology)

Uses your system voice; voice and rate in settings.

Snapshot

≈ 3 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

WREL (an acronym for Wireless Resonant Energy Link) is a form of wireless resonant energy transfer technology developed by Intel. The technology relies on strongly coupled based on resonant inductive coupling caused by electromagnetic resonators, a principle similar to the way a trained singer can shatter a glass using his/her voice. At the receiving resonator's natural frequency, energy is absorbed efficiently, just as a glass absorbs acoustic energy at its natural frequency. At the wall socket, power is put into magnetic fields at a transmitting resonator - basically an antenna. The receiving resonator is tuned to efficiently absorb energy from the magnetic field, whereas nearby objects do not.

WREL (an acronym for Wireless Resonant Energy Link) is a form of wireless resonant energy transfer technology developed by Intel. The technology relies on strongly coupled based on resonant inductive coupling caused by electromagnetic resonators, a principle similar to the way a trained singer can shatter a glass using his/her voice. At the receiving resonator's natural frequency, energy is absorbed efficiently, just as a glass absorbs acoustic energy at its natural frequency. At the wall socket, power is put into magnetic fields at a transmitting resonator - basically an antenna. The receiving resonator is tuned to efficiently absorb energy from the magnetic field, whereas nearby objects do not.

Principles

In a resonating system, the quality of the resonance is determined by its Q factor; 2 pi times the ratio of the energy in the resonant circuit divided by its loss per cycle. When two non resonating coils are placed some distance apart, some fraction of the magnetic field from one coil couples into the second, and so changes in the magnetic field of one coil generates a voltage at the other (in accordance with Faraday's law of induction), however little of the energy will couple because most of the field will miss the receiver.

The fraction of the field that does couple is called the coupling coefficient. However, it may be seen that if some energy is placed in a 'sender' coil when it is in resonance then the coil will ring for a number of cycles before losing the energy to its resistance. Provided the Q of the transmitting circuit is high enough to overcome the coupling coefficient, then most of the power can eventually be absorbed by the receiving coil over several cycles and can be tapped off.

The remaining power will be lost in the resistance of the sender, and some in the receiver coil also.

See also

WiTricity Nikola Tesla Wireless energy transfer Evanescent wave coupling Coupled inductors List of emerging technologies

Text derived from https://en.wikipedia.org/w/index.php?oldid=1341597266 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

1 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.