X-parameters

Uses your system voice; voice and rate in settings.

Snapshot

≈ 2 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

MTT-S International Microwave Symposium, Boston MA June 10, 2009.) X-parameters are a generalization of S-parameters and are used for characterizing the amplitudes and relative phase of harmonics generated by nonlinear components under large input power levels. X-parameters are also referred to as the parameters of the Poly-Harmonic Distortion (PHD) nonlinear behavioral model.

MTT-S International Microwave Symposium, Boston MA June 10, 2009.)]] X-parameters are a generalization of S-parameters and are used for characterizing the amplitudes and relative phase of harmonics generated by nonlinear components under large input power levels. X-parameters are also referred to as the parameters of the Poly-Harmonic Distortion (PHD) nonlinear behavioral model.

Description

X-parameters represent a new category of nonlinear network parameters for high-frequency design (Nonlinear vector network analyzers are sometimes called large signal network analyzers. ) X-parameters are applicable to both large-signal and small-signal conditions, for linear and nonlinear components. They are an extension of S-parameters meaning that, in the limit of a small signal, X-parameters reduce to S-parameters. They help overcome a key challenge in RF engineering, namely that nonlinear impedance differences, harmonic mixing, and nonlinear reflection effects occur when components are cascaded under large signal operating conditions. This means that there is a nonlinear and as such non-trivial relationship between the properties of the individual cascaded components and the composite properties of the resulting cascade. This situation is unlike that at DC, where one can simply add the values of resistors connected in series. X-parameters help solve this cascading problem: if the X-parameters of a set of components are measured individually, the X-parameters (and hence the non-linear transfer function) can be calculated of any cascade made from them. Calculations based on X-parameters are usually performed within a harmonic balance simulator environment.

See also

Two-port network

Notes

External links

Fundamentally Changing Nonlinear Microwave Design by David Vye Editor, Microwave Journal Vol. 53 No. 3 March 2010 Page 22] (former location )

Text derived from https://en.wikipedia.org/w/index.php?oldid=1313086754 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

Extracted from the cited revision's reference blocks; absent citations are not invented.