Lesson plan

X2 transceiver

The X2 transceiver format is a 10 gigabit per second modular fiber optic interface intended for use in routers, switches and optical transport platforms. It is an early generation 10 gigabit interface related to the similar XENPAK and XPAK formats. X2 may be used with 10 Gigabit Ethernet or OC-192/STM-64 speed SDH/SONET equipment. X2 modules are smaller and consume less power than first-generation XENPAK modules, but larger and consume more energy than the newer XFP transceiver standard and SFP+ standards. this format is relatively uncommon and has been replaced by SFP+ in most new equipment.

Back to article

Article summary

The X2 transceiver format is a 10 gigabit per second modular fiber optic interface intended for use in routers, switches and optical transport platforms. It is an early generation 10 gigabit interface related to the similar XENPAK and XPAK formats. X2 may be used with 10 Gigabit Ethernet or OC-192/STM-64 speed SDH/SONET equipment. X2 modules are smaller and consume less power than first-generation XENPAK modules, but larger and consume more energy than the newer XFP transceiver standard and SFP+ standards. this format is relatively uncommon and has been replaced by SFP+ in most new equipment.

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.