Lesson plan

XBC

The XBC, or the Xport Botball Controller, is a robot based on Charmed Labs' Xport hardware. It was built specifically for the Botball competition and uses a Game Boy Advance for its display and for high-level processing; a field-programmable gate array is used to offload low-level processing of motors and sensors from the Game Boy Advance. The XBC is programmed using Interactive C, which is a variant of the C programming language. The XBC replaced the RCX in 2005 as Botball's official processor. The RCX can be programmed using Interactive C, Not Quite C, or Lego's simple GUI interface. Both robots can have bases built with Lego pieces.

Back to article

Article summary

The XBC, or the Xport Botball Controller, is a robot based on Charmed Labs' Xport hardware. It was built specifically for the Botball competition and uses a Game Boy Advance for its display and for high-level processing; a field-programmable gate array is used to offload low-level processing of motors and sensors from the Game Boy Advance. The XBC is programmed using Interactive C, which is a variant of the C programming language. The XBC replaced the RCX in 2005 as Botball's official processor. The RCX can be programmed using Interactive C, Not Quite C, or Lego's simple GUI interface. Both robots can have bases built with Lego pieces.

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.