Lesson plan
Zendik
The Zendik was a British cyclecar designed by Harold Birdsall Bullingham (1879–1952) and made by Zendik Cars Ltd of Thames Street, Kingston upon Thames, Surrey, England in 1912 and 1913. They had a sales office and showroom run by H Jenks at Ebury Street, Eaton Square, London SW. The car had an air-cooled 8 hp V-twin cylinder Chater-Lea engine driving the rear wheels through a two speed transmission with top gear being direct and the lower gear a chain reduction system. Reverse gear was obtained by diverting the drive through two friction wheels, one on the front of the propeller shaft and a larger one connected to the low gear countershaft in the transmission. The footbrake operated on the rear wheels with internal expanding shoes and the handbrake controlled a leather faced band contracting onto the main drive shaft. The final drive to the rear axle used a worm drive reduction system. The chassis was wood with metal reinforcing and semi-elliptic springs were fitted to front and rear axles. Wire spoked wheels with 26 x 2.5 tyres were fitted. The car was provided with two-seat coachwork with a dummy radiator with a Zendik script across it. The body changed little throughout the life of the company. An updated version was announced in 1913 but probably never reached production.…
Article summary
The Zendik was a British cyclecar designed by Harold Birdsall Bullingham (1879–1952) and made by Zendik Cars Ltd of Thames Street, Kingston upon Thames, Surrey, England in 1912 and 1913. They had a sales office and showroom run by H Jenks at Ebury Street, Eaton Square, London SW. The car had an air-cooled 8 hp V-twin cylinder Chater-Lea engine driving the rear wheels through a two speed transmission with top gear being direct and the lower gear a chain reduction system. Reverse gear was obtained by diverting the drive through two friction wheels, one on the front of the propeller shaft and a larger one connected to the low gear countershaft in the transmission. The footbrake operated on the rear wheels with internal expanding shoes and the handbrake controlled a leather faced band contracting onto the main drive shaft. The final drive to the rear axle used a worm drive reduction system. The chassis was wood with metal reinforcing and semi-elliptic springs were fitted to front and rear axles. Wire spoked wheels with 26 x 2.5 tyres were fitted. The car was provided with two-seat coachwork with a dummy radiator with a Zendik script across it. The body changed little throughout the life of the company. An updated version was announced in 1913 but probably never reached production.…
Key claims
- publication date: 1913 — source: Wikipedia, revision 1283662355, retrieved 2026-10-20 · confidence 0.95
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- The record states that the publication date is "1913". What evidence would count against this claim?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
- Wikipedia, “Zendik”, revision 1283662355, retrieved 2026-10-20 https://en.wikipedia.org/w/index.php?oldid=1283662355
Key claims and bibliography are generated from the same tracked claims and sources as the article page.