zeolite

tectosilicate mineral

Uses your system voice; voice and rate in settings.

Q181332Snapshot

≈ 13 min read

Names in other languages

  • Englishzeolite
  • euZeolita
  • Polskizeolity
  • 中文沸石
  • 简体中文沸石
  • 繁體中文沸石
  • 中文沸石
  • 中文沸石
  • 中文沸石

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

Zeolites are a group of several microporous, crystalline aluminosilicate minerals commonly used as commercial adsorbents and catalysts. They mainly consist of silicon, aluminium, and oxygen, and have the general formula ・y where is either a metal ion or H + .

The term was originally coined in 1756 by Swedish mineralogist Axel Fredrik Cronstedt, who observed that rapidly heating a material, believed to have been stilbite, produced large amounts of steam from water that had been adsorbed by the material. Based on this, he called the material zeolith (changed later to zeolite in English, to fit the naming scheme for minerals in -ite) from the Greek , meaning "to boil" and , meaning "stone".

Production

The first synthetic structure was reported by Richard Barrer in 1948. Industrially important zeolites are produced synthetically. Over 200 synthetic zeolites have been reported.

Synthetic zeolites hold some key advantages over their natural analogs. The synthetic materials are manufactured in a uniform, phase-pure state. It is also possible to produce zeolite structures that do not appear in nature.

Zeolite A is a well-known example. The principal raw materials used to manufacture zeolites are silica and alumina, which are among the most abundant mineral components on earth. Zeolites occur naturally, but are also produced industrially on a large scale. , 253 unique zeolite frameworks have been identified, and over 40 naturally occurring zeolite frameworks are known.

Every new zeolite structure that is obtained is examined by the International Zeolite Association Structure Commission (IZA-SC) and receives a three-letter designation.

Properties

) framework, assembled from corner-sharing tetrahedra. Sodium is present as an extra-framework cation (in green). Si atoms can be partially replaced by Al or other tetravalent metals.

Zeolites are white solids with ordinary handling properties, like many routine aluminosilicate minerals, e.g. feldspar. They have the general formula where M + is usually H + and Na + . The Si/Al ratio is variable, which provides a means to tune the properties.

Zeolites with a Si/Al ratios higher than about 3 are classified as high-silica zeolites, which tend to be more hydrophobic. The H + and Na + can be replaced by diverse cations, because zeolites have ion exchange properties. The nature of the cations influences the porosity of zeolites.

Zeolites have microporous structures with a typical diameter of 0.3–0.8 nm. Like most aluminosilicates, the framework is formed by linking of aluminium and silicon atoms by oxides. This linking leads to a 3-dimensional network of Si-O-Al, Si-O-Si, and Al-O-Al linkages.

The aluminium centers are negatively charged, which requires an accompanying cation. These cations are hydrated during the formation of the materials. The hydrated cations interrupt the otherwise dense network of Si-O-Al, Si-O-Si, and Al-O-Al linkage, leading to regular water-filled cavities.

Because of the porosity of the zeolite, the water can exit the material through channels. Because of the rigidity of the zeolite framework, the loss of water does not result in collapse of the cavities and channels. Their ability to generate voids within a rigid solid underpins the use of zeolites as catalysts and molecular sieves.

They possess high physical and chemical stability due to the covalent bonding within their framework. Some are hydrophobic and thus are suited for adsorption of hydrophobic molecules such as hydrocarbons. In addition to that, high-silica zeolites are exchangeable, unlike natural zeolites, and are used as solid acid catalysts.

The high silica zeolites especially are sufficiently acidic to protonate hydrocarbons. These are used for fluid catalytic cracking in petrochemical industry. Cracking catalysts become poisoned by carbonaceous residues.

These residues can be combusted without major damage to the host zeolite, a further testament to their robustness. For some applications, such regenerated zeolites are called equilibrium catalysts.

Framework structure

The structures of hundreds of zeolites have been determined. Most do not occur naturally. For each structure, the International Zeolite Association (IZA) gives a three-letter code called framework type code (FTC).

For example, the major molecular sieves, 3A, 4A and 5A, are all LTA (Linde Type A). Most commercially available natural zeolites are of the MOR, HEU or ANA-types. An example of the notation of the ring structure of zeolite and other silicate materials is shown in the upper right figure. The middle figure shows a common notation using structural formula.

The left figure emphasizes the SiO tetrahedral structure. Connecting oxygen atoms together creates a four-membered ring of oxygen (blue bold line). In fact, such a ring substructure is called four membered ring or simply four-ring.

The figure on the right shows a 4-ring with Si atoms connected to each other, which is the most common way to express the topology of the framework. The figure on the right compares the typical framework structures of LTA (left) and FAU (right). Both zeolites share the truncated octahedral structure (sodalite cage) (purple line).

However, the way they are connected (yellow line) is different: in LTA, the four-membered rings of the cage are connected to each other to form a skeleton, while in FAU, the six-membered rings are connected to each other. As a result, the pore entrance of LTA is an 8-ring (0.41 nm ) and belongs to the small pore zeolite, while the pore entrance of FAU is a 12-ring (0.74 nm ) and belongs to the large pore zeolite, respectively.

Materials with a 10-ring are called medium pore zeolites, a typical example being ZSM-5 (MFI). Although more than 200 types of zeolites are known, only about 100 types of aluminosilicate are available. In addition, there are only a few types that can be synthesized in industrially feasible way and have sufficient thermal stability to meet the requirements for industrial use.

In particular, the FAU (faujasite, USY), * BEA (beta), MOR (high-silica mordenite), MFI (ZSM-5), and FER (high-silica ferrierite) types are called the big five of high silica zeolites, and industrial production methods have been established.

Isomorphous replacement

The scope of zeolites is greatly expanded because Si and Al in zeolites can be at least partially replaced with other atoms without major changes in the overall framework, i.e., isomorphous replacement. Germanium, iron, gallium, boron, zinc, tin, and titanium have been investigated.

Other heteroatoms have been claimed, including titanium, and zinc Al atoms in zeolites can be also structurally replaced with boron and gallium. The silicoaluminophosphate type (AlPO molecular sieve), in which Si is isomorphous with Al and P and Al is isomorphous with Si, and the gallogermanate and others are known.

Porosity

The term molecular sieve refers to a particular property of these materials, i.e., the ability to selectively sort molecules based primarily on a size exclusion process. This is due to a very regular pore structure of molecular dimensions. The maximum size of the molecular or ionic species that can enter the pores of a zeolite is controlled by the dimensions of the channels.

These are conventionally defined by the ring size of the aperture, where, for example, the term "eight-ring" refers to a closed-loop that is built from eight tetrahedrally coordinated silicon (or aluminium) atoms and eight oxygen atoms. These rings are not always perfectly symmetrical due to a variety of causes, including strain induced by the bonding between units that are needed to produce the overall structure or coordination of some of the oxygen atoms of the rings to cations within the structure.

Therefore, the pores in many zeolites are not cylindrical.

Natural occurrence

needles from Hohentwiel (Typelocality) Some of the more common mineral zeolites are analcime, chabazite, clinoptilolite, heulandite, natrolite, phillipsite, and stilbite. An example of the mineral formula of a zeolite is: ·2H 2 O, the formula for natrolite. Zeolites transform to other minerals under weathering, hydrothermal alteration or metamorphic conditions.

Some examples: The sequence of silica-rich volcanic rocks commonly progresses from: Clay → quartz → mordenite–heulandite → epistilbite → stilbite → thomsonite → mesolite → scolecite → chabazite → calcite. The sequence of silica-poor volcanic rocks commonly progresses from: Cowlesite → levyne → offretite → analcime → thomsonite → mesolite → scolecite → chabazite → calcite.

Ore mining

from Poland , the world's annual production of natural zeolite approximates 3 million tonnes. Major producers in 2010 included China (2 million tonnes), South Korea (210,000 t), Japan (150,000 t), Jordan (140,000 t), Turkey (100,000 t) Slovakia (85,000 t) and the United States (59,000 t). The ready availability of zeolite-rich rock at low cost and the shortage of competing minerals and rocks are probably the most important factors for its large-scale use.

According to the United States Geological Survey, it is likely that a significant percentage of the material sold as zeolites in some countries is ground or sawn volcanic tuff that contains only a small amount of zeolites. These materials are used for construction, e.g. dimension stone (as an altered volcanic tuff), lightweight aggregate, pozzolanic cement, and soil conditioners.

Synthesis

Typical procedures entail heating aqueous solutions of alumina and silica with sodium hydroxide. Equivalent reagents include sodium aluminate and sodium silicate. Further variations include the use of structure directing agents (SDA) such as quaternary ammonium cations.

Zeolite synthesis involves sol-gel-like processes. The product properties depend on reaction mixture composition, pH of the system, operating temperature, pre-reaction 'seeding' time, reaction time as well as the templates used. In the sol-gel process, other elements (metals, metal oxides) can be incorporated.

Gas separation and storage

Zeolites have the potential of providing precise and specific separation of gases, including the removal of H 2 O, CO 2 , and SO 2 from low-grade natural gas streams. Other separations include noble gases, N 2 , O 2 , freon, and formaldehyde.

On-board oxygen generating systems (OBOGS) and oxygen concentrators use zeolites in conjunction with pressure swing adsorption to remove nitrogen from compressed air to supply oxygen for aircrews at high altitudes, as well as home and portable oxygen supplies. Zeolite-based oxygen concentrator systems are widely used to produce medical-grade oxygen.

The zeolite is used as a molecular sieve to create purified oxygen from air using its ability to trap impurities, in a process involving the adsorption of nitrogen, leaving highly purified oxygen and up to 5% argon. Zeolites are also used as a molecular sieve in cryosorption style vacuum pumps.

Solar energy storage and use

Zeolites can be used to thermochemically store solar heat harvested from solar thermal collectors as first demonstrated by Guerra in 1978 and for adsorption refrigeration, as first demonstrated by Tchernev in 1974. In these applications, their high heat of adsorption and ability to hydrate and dehydrate while maintaining structural stability is exploited.

This hygroscopic property coupled with an inherent exothermic (energy releasing) reaction when transitioning from a dehydrated form to a hydrated form make natural zeolites useful in harvesting waste heat and solar heat energy.

Veterinary and human use

Zeolites have some veterinary applications, with clinoptilolite approved in the EU as an additive for cattle feed. It acts primarily as a detoxifying agent in the gut, where is can absorb undesirable species via ion-exchange before being excreted.

For instance, nitrate fertilisers are water soluble and prolonged exposure by dairy cattle is known to impair protein metabolism and glucose utilization. Clinoptilolite adsorbs nitrate ions with good selectivity, allowing it to reduce these ill effects. Zeolites have been studied for human medical applications, particularly for bowel conditions.

There are no approved medical uses for zeolites as of 2024. Regardless, they are widely marketed as dietary supplements.

09.GA. – Zeolites with T 5 O 10 units (T = combined Si and Al): the fibrous zeolites Natrolite framework (NAT): gonnardite, natrolite, mesolite, paranatrolite, scolecite, tetranatrolite Edingtonite framework (EDI): edingtonite, kalborsite Thomsonite framework (THO): thomsonite-series 09.GB. – Chains of single connected 4-membered rings Analcime framework (ANA): analcime, leucite (topologically a zeolite despite being anhydrous; chemically a feldspathoid), pollucite, wairakite Laumontite (LAU), yugawaralite (YUG), goosecreekite (GOO), montesommaite (MON) 09.GC. – Chains of doubly connected 4-membered rings Phillipsite framework (PHI): harmotome, phillipsite-series Gismondine framework (GIS): amicite, gismondine, garronite, gobbinsite Boggsite (BOG), merlinoite (MER), mazzite-series (MAZ), paulingite-series (PAU), perlialite (Linde type L framework, zeolite L, LTL) 09.GD. – Chains of 6-membered rings: tabular zeolites Chabazite framework (CHA): chabazite-series, herschelite, willhendersonite and SSZ-13 Faujasite framework (FAU): faujasite-series, Linde type X (zeolite X, X zeolites), Linde type Y (zeolite Y, Y zeolites) Mordenite framework (MOR): maricopaite, mordenite Offretite–wenkite subgroup 09.GD.25 (Nickel–Strunz, 10 ed): offretite (OFF), wenkite (WEN) Bellbergite (TMA-E, Aiello and Barrer; framework type EAB), bikitaite (BIK), erionite-series (ERI), ferrierite (FER), gmelinite (GME), levyne-series (LEV), dachiardite-series (DAC), epistilbite (EPI) 09.GE. – Chains of T 10 O 20 tetrahedra (T = combined Si and Al) Heulandite framework (HEU): clinoptilolite, heulandite-series Stilbite framework (STI): barrerite, stellerite, stilbite-series Brewsterite framework (BRE): brewsterite-series Others Cowlesite, pentasil (also known as ZSM-5, framework type MFI), tschernichite (beta polymorph A, disordered framework, BEA), Linde type A framework (zeolite A, LTA)

Hypothetical minerals

Hypothetical zeolites are combinatorial models of potential structures of these minerals. They are four-regular periodic graphs, with vertices representing the tetrahedral atom (usually Si or Al) and the edges representing the bridging oxygen atoms.

Alternatively, by ignoring the tetrahedral atoms, zeolites can be represented by a six-valent periodic graph of oxygen atoms, with each O-O edge defining an edge of a tetrahedron. At present there are millions of hypothetical zeolite frameworks known.

For any fixed number of vertices, these are a small fraction of possible 4-regular periodic graphs, because the geometric constraints imposed by the chemistry of zeolites rules out most possibilities.

Enumeration methods

There are several methods for enumerating zeolite frameworks. The method of Earl et al. uses simulated annealing to arrange a fixed number of tetrahedral atoms under periodic symmetry constraints. The method of Sartbaeva et al. uses combinatorial enumeration to identify four-valent graphs under fixed symmetry and fixed number of tetrahedral atoms.

This is then followed by a simulated annealing embedding of the candidate graph into the 3-dimensional torus. Ockwig et al. tile polyhedra to fill space and generate four-valent graphs.

Open questions

There many open questions, among them: Why there is such a large discrepancy between the number of hypothetical zeolites and the number of zeolite frameworks observed in nature? Can the pore structure of a hypothetical zeolite be predicted only from its periodic graph?

Safety

The majority of zeolites are nontoxic. Fibrous zeolites such as erionite have been linked to lung cancer mesothelioma. Other possible asbestiform zeolites with ongoing research (or more research needed) into their possible toxicty include: ferrierite (leading candidate for toxicity due to being very similar chemically and habit as erionite), mordenite, mesolite thomsonite, natrolite, and scolecite.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1378062831 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

28 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.