Zirconium dioxide

Zirconium dioxide ( ), sometimes known as zirconia (not to be confused with zirconium silicate or zircon), is a white crystalline oxide of zirconium.

Uses your system voice; voice and rate in settings.

≈ 5 min read

Cite, export and learn8 citation formats · 8 exports · lesson and quiz

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

Zirconium dioxide ( ), sometimes known as zirconia (not to be confused with zirconium silicate or zircon), is a white crystalline oxide of zirconium. Its most naturally occurring form, with a monoclinic crystalline structure, is the mineral baddeleyite. A dopant stabilized cubic structured zirconia, cubic zirconia, is synthesized in various colours for use as a gemstone and a diamond simulant.

Production, chemical properties, occurrence

Zirconia is produced by calcining zirconium compounds, exploiting its high thermostability.

Structure

Three phases are known: monoclinic below 1170 °C, tetragonal between 1170 °C and 2370 °C, and cubic above 2370 °C. The trend is for higher symmetry at higher temperatures, as is usually the case. A small percentage of the oxides of calcium or yttrium stabilize in the cubic phase. The very rare mineral tazheranite, , is cubic.

Unlike , which features six-coordinated titanium in all phases, monoclinic zirconia consists of seven-coordinated zirconium centres. This difference is attributed to the larger size of the zirconium atom relative to the titanium atom.

Chemical reactions

Zirconia is chemically unreactive. It is slowly attacked by concentrated hydrofluoric acid and sulfuric acid. When heated with carbon, it converts to zirconium carbide.

When heated with carbon in the presence of chlorine, it converts to zirconium(IV) chloride. This conversion is the basis for the purification of zirconium metal and is analogous to the Kroll process.

3Y stabilised ZrO 2 and 5Y stabilized ZrO 2

When ZrO 2 is stabilized by adding 3 mol% of yttrium oxide (3Y-ZrO 2 ) at high temperatures (~1500 °C), its mechanical properties such as fracture toughness, flexural strength, and hardness are significantly improved. This is because 3Y-ZrO 2 retains a metastable tetragonal phase at room temperature, which undergoes a stress-induced transformation to the monoclinic phase, leading to phase transformation toughening mechanism under high stress intensity.

In contrast, when ZrO 2 is stabilized with 5 mol% of yttrium oxide (5Y-ZrO 2 ), it is primarily in the cubic phase, and does not undergo transformation toughening mechanism when stress is applied. As a result, while 5Y-ZrO₂ exhibits better optical properties, i.e., enhanced translucency due to fewer grain boundaries to scatter light, its mechanical properties (fracture toughness, strength, and hardness) do not improve in the same way as 3Y-ZrO₂.

Uses

The main use of zirconia is in the production of hard ceramics, such as in dentistry, with other uses including as a protective coating on particles of titanium dioxide pigments, as a refractory material, in insulation, abrasives, and enamels. Stabilized zirconia is used in oxygen sensors and fuel cell membranes because it has the ability to allow oxygen ions to move freely through the crystal structure at high temperatures.

This high ionic conductivity (and a low electronic conductivity) makes it one of the most useful electroceramics. Zirconium dioxide is also used as the solid electrolyte in electrochromic devices. Zirconia is a precursor to the electroceramic lead zirconate titanate (PZT), which is a high-κ dielectric, which is found in myriad components.

Niche uses

The very low thermal conductivity of cubic phase of zirconia also has led to its use as a thermal barrier coating, or TBC, in jet and diesel engines to allow operation at higher temperatures. Thermodynamically, the higher the operation temperature of an engine, the greater the possible efficiency.

Another low-thermal-conductivity use is as a ceramic fiber insulation for crystal growth furnaces, fuel-cell stacks, and infrared heating systems. This material is also used in dentistry in the manufacture of subframes for the construction of dental restorations such as crowns and bridges, which are then veneered with a conventional feldspathic porcelain for aesthetic reasons, or of strong, extremely durable dental prostheses constructed entirely from monolithic zirconia, with limited but constantly improving aesthetics.

Zirconia stabilized with yttria (yttrium oxide), known as yttria-stabilized zirconia, can be used as a strong base material in some full ceramic crown restorations. Transformation-toughened zirconia is used to make ceramic knives. Because of the hardness, ceramic-edged cutlery stays sharp longer than steel edged products.

Due to its infusibility and brilliant luminosity when incandescent, it was used as an ingredient of sticks for limelight . Zirconia was used as an alternative to limelight in zirconia lights.

Zirconia has been proposed to electrolyze carbon monoxide and oxygen from the atmosphere of Mars to provide both fuel and oxidizer that could be used as a store of chemical energy for use with surface transportation on Mars. Carbon monoxide/oxygen engines have been suggested for early surface transportation use, as both carbon monoxide and oxygen can be straightforwardly produced by zirconia electrolysis without requiring water to obtain hydrogen, needed for the production of methane or hydrogen-based fuels.

Zirconia is also used in the deposition of optical coatings. It is a high-index material usable from the near-UV to the mid-IR, due to its low absorption in this spectral region. In such applications, it is typically deposited by PVD.

In jewelry making, some watch cases are advertised as being "black zirconium oxide". In 2015 Omega released a fully watch named "The Dark Side of The Moon" with ceramic case, bezel, pushers, and clasp, advertising it as four times harder than stainless steel and therefore much more resistant to scratches during everyday use.

In gas tungsten arc welding, tungsten electrodes containing 1% zirconium oxide (zirconia) instead of 2% thorium have good arc starting and current capacity, and are not radioactive.

Research

Zirconia has been studied as a photocatalyst since its high band gap (~ 5 eV) allows the generation of high-energy electrons and holes. Some studies demonstrated the activity of doped zirconia (in order to increase visible light absorption) in degrading organic compounds and reducing Cr(VI) from wastewaters.

Zirconia is also a potential high-κ dielectric material with potential applications as an insulator in transistors. In 2026, researchers demonstrated a printed ZrO 2 fabric that exhibited passive cooling and some degree of electricity generation.

See also

Quenching Sintering S-type star, emitting spectral lines of zirconium monoxide Yttria-stabilized zirconia

NIOSH Pocket Guide to Chemical Hazards

Text derived from https://en.wikipedia.org/w/index.php?oldid=1377689191 under CC BY-SA 4.0; modifications have been made.

Words in each sectionNiche usesNiche usesNiche uses: 397 words3973Y stabilised ZrO 2 and…3Y stabilised ZrO 2 and 5Y stabilized ZrO 23Y stabilised ZrO 2 and 5Y stabilized ZrO 2: 136 words136UsesUsesUses: 120 words120StructureStructureStructure: 88 words88ResearchResearchResearch: 82 words82Chemical reactionsChemical reactionsChemical reactions: 57 words57See alsoSee alsoSee also: 12 words12Production, chemical pr…Production, chemical properties, occurrenceProduction, chemical properties, occurrence: 11 words11
Words in each section. Measured from the stored article body; sections below the minimum are not plotted.

Provenance

snapshot enwiki-001377689191 · captured 2026-09-30 · ledger · version history

Cite this page as: encyclopegia.org, “Zirconium dioxide”, snapshot enwiki-001377689191. https://encyclopegia.org/a/zirconium-dioxide

Sources cited in this revision

11 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.