Lesson plan
Zores section
A Zores section (also: Z-section) was a railway beam section designed by French engineer, , in the second half of the 19th century for use in the supporting frames of various railway structures. They were very common in France. In other countries, such as Germany, the originally designated fer arrondi (rounded profile) became a standardised rolling mill profile for wrought iron, its shape resembling an upside down rain gutter. It was used as surfacing on steel bridges, covering the deck girders and forming the base on which gravel, concrete or plaster for the actual trackbed was laid. It was spaced 2 to 3 centimetres apart in order to improved drainage. For the same purpose, usually for smaller loads, buckled plate was used. Croquis profilé Zorès.png|Sketch of Zorès section Fers Zores pour chemins de fer.jpg|Zores beams used for steel rail track sleepers. Zöres-Eisen.png|Zores sections sold in Germany
Article summary
A Zores section (also: Z-section) was a railway beam section designed by French engineer, , in the second half of the 19th century for use in the supporting frames of various railway structures. They were very common in France. In other countries, such as Germany, the originally designated fer arrondi (rounded profile) became a standardised rolling mill profile for wrought iron, its shape resembling an upside down rain gutter. It was used as surfacing on steel bridges, covering the deck girders and forming the base on which gravel, concrete or plaster for the actual trackbed was laid. It was spaced 2 to 3 centimetres apart in order to improved drainage. For the same purpose, usually for smaller loads, buckled plate was used. Croquis profilé Zorès.png|Sketch of Zorès section Fers Zores pour chemins de fer.jpg|Zores beams used for steel rail track sleepers. Zöres-Eisen.png|Zores sections sold in Germany
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.