Lesson plan
AFm phases
An AFm phase is an "alumina, ferric oxide, monosubstituted" phase, or aluminate ferrite monosubstituted, or , mono, in cement chemist notation (CCN). AFm phases are important hydration products in the hydration of Portland cements and hydraulic cements. They are crystalline hydrates with generic, simplified, formula , where: * CaO, , represent calcium oxide, aluminium oxide, and ferric oxide, respectively; * CaX represents a calcium salt, where X replaces an oxide ion; * X is the substituted anion in CaX: – divalent ( , ...) with y = 1, or; – monovalent ( , ...) with y = 2. * n represents the number of water molecules in the hydrate and may be comprised between 13 and 19. AFm form inter alia when tricalcium aluminate in CCN, reacts with dissolved calcium sulfate ( ), or calcium carbonate ( ). As the sulfate form is the dominant one in AFm phases in the hardened cement paste (HCP) in concrete, AFm is often simply referred to as Aluminate Ferrite monosulfate or calcium aluminate monosulfate. However, carbonate-AFm phases also exist (monocarbonate and hemicarbonate) and are thermodynamically more stable than the sulfate-AFm phase. During concrete carbonation by the atmospheric , sulfate-AFm phase is also slowly transformed into carbonate-AFm phases.
Article summary
An AFm phase is an "alumina, ferric oxide, monosubstituted" phase, or aluminate ferrite monosubstituted, or , mono, in cement chemist notation (CCN). AFm phases are important hydration products in the hydration of Portland cements and hydraulic cements. They are crystalline hydrates with generic, simplified, formula , where: * CaO, , represent calcium oxide, aluminium oxide, and ferric oxide, respectively; * CaX represents a calcium salt, where X replaces an oxide ion; * X is the substituted anion in CaX: – divalent ( , ...) with y = 1, or; – monovalent ( , ...) with y = 2. * n represents the number of water molecules in the hydrate and may be comprised between 13 and 19. AFm form inter alia when tricalcium aluminate in CCN, reacts with dissolved calcium sulfate ( ), or calcium carbonate ( ). As the sulfate form is the dominant one in AFm phases in the hardened cement paste (HCP) in concrete, AFm is often simply referred to as Aluminate Ferrite monosulfate or calcium aluminate monosulfate. However, carbonate-AFm phases also exist (monocarbonate and hemicarbonate) and are thermodynamically more stable than the sulfate-AFm phase. During concrete carbonation by the atmospheric , sulfate-AFm phase is also slowly transformed into carbonate-AFm phases.
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.