Analog signal processing

Uses your system voice; voice and rate in settings.

Snapshot

≈ 4 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

Analog signal processing is a type of signal processing conducted on continuous analog signals by some analog means (as opposed to the discrete digital signal processing (DSP) where the signal processing is carried out by a digital process). Examples of analog signal processing include crossover filters in loudspeakers, bass, treble and volume controls on stereos, and tint controls on television sets.

Common analog processing elements include capacitors, resistors and inductors (as the passive elements) and transistors or op-amps (as the active elements). indicates something that is mathematically represented as a set of continuous values. This differs from which uses a series of discrete quantities to represent signal. Analog values are typically represented as a voltage, electric current, or electric charge around components in the electronic devices.

An error or noise affecting such physical quantities will result in a corresponding error in the signals represented by such physical quantities.

How it works

Analog signal processing is a type of signal processing conducted on continuous analog signals by some analog means (as opposed to the discrete digital signal processing (DSP) where the signal processing is carried out by a digital process). Examples of analog signal processing include crossover filters in loudspeakers, bass, treble and volume controls on stereos, and tint controls on television sets.

Common analog processing elements include capacitors, resistors and inductors (as the passive elements) and transistors or op-amps (as the active elements). indicates something that is mathematically represented as a set of continuous values. This differs from which uses a series of discrete quantities to represent signal. Analog values are typically represented as a voltage, electric current, or electric charge around components in the electronic devices.

An error or noise affecting such physical quantities will result in a corresponding error in the signals represented by such physical quantities. y(t) = (x * h )(t) = \int_{a}^{b} x(\tau) h(t - \tau)\, d\tau That is the convolution integral and is used to find the convolution of a signal and a system; typically and . Consider two waveforms and . By calculating the convolution, we determine how much a reversed function must be shifted along the x-axis to become identical to function .

The convolution function essentially reverses and slides function along the axis, and calculates the integral of their ( and the reversed and shifted ) product for each possible amount of sliding. When the functions match, the value of ( ) is maximized. This occurs because when positive areas (peaks) or negative areas (troughs) are multiplied, they contribute to the integral.

X(j\omega) = \int^\infty_{-\infty} x(t)e^{-j\omega t}\, dt Usually the Fourier transform integral is not used to determine the transform; instead, a table of transform pairs is used to find the Fourier transform of a signal or system. The inverse Fourier transform is used to go from frequency domain to time domain: x(t)=\frac{1}{2\pi}\int^\infty_{-\infty} X(j\omega )e^{j\omega t}\, d\omega Each signal or system that can be transformed has a unique Fourier transform. There is only one time signal for any frequency signal, and vice versa.

X(s) = \int^\infty_{0^-} x(t)e^{-s t}\, dt and the inverse Laplace transform, if all the singularities of are in the left half of the complex plane, is: x(t) = \frac{1}{2\pi}\int^\infty_{-\infty} X(s )e^{s t}\, d s . u(t) = \int_{-\infty}^{t} \delta (s)ds

Text derived from https://en.wikipedia.org/w/index.php?oldid=1377766792 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

No external citation was extracted for this revision. That is a statement about the source, not a claim that none exists.