Lesson plan

Analog signal processing

Analog signal processing is a type of signal processing conducted on continuous analog signals by some analog means (as opposed to the discrete digital signal processing (DSP) where the signal processing is carried out by a digital process). Examples of analog signal processing include crossover filters in loudspeakers, bass, treble and volume controls on stereos, and tint controls on television sets. Common analog processing elements include capacitors, resistors and inductors (as the passive elements) and transistors or op-amps (as the active elements). indicates something that is mathematically represented as a set of continuous values. This differs from which uses a series of discrete quantities to represent signal. Analog values are typically represented as a voltage, electric current, or electric charge around components in the electronic devices. An error or noise affecting such physical quantities will result in a corresponding error in the signals represented by such physical quantities.

Back to article

Article summary

Analog signal processing is a type of signal processing conducted on continuous analog signals by some analog means (as opposed to the discrete digital signal processing (DSP) where the signal processing is carried out by a digital process). Examples of analog signal processing include crossover filters in loudspeakers, bass, treble and volume controls on stereos, and tint controls on television sets. Common analog processing elements include capacitors, resistors and inductors (as the passive elements) and transistors or op-amps (as the active elements). indicates something that is mathematically represented as a set of continuous values. This differs from which uses a series of discrete quantities to represent signal. Analog values are typically represented as a voltage, electric current, or electric charge around components in the electronic devices. An error or noise affecting such physical quantities will result in a corresponding error in the signals represented by such physical quantities.

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.