Auto-configuration

Uses your system voice; voice and rate in settings.

Snapshot

≈ 2 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

Auto-configuration is the automatic configuration of devices without manual intervention, without any need for software configuration programs or jumpers. Ideally, auto-configuring devices should just "plug and play". Auto-configuration has been made common because of the low cost of microprocessors and other embedded controller devices. Configurations may be stored in NVRAM, loaded by a host processor, or negotiated at system initialization time. In some cases, hot pluggable devices may be able to renegotiate their configuration. Example of auto-configuring devices: * USB Example of auto-configuring devices and protocols: * DHCP * Zeroconf

Auto-configuration is the automatic configuration of devices without manual intervention, without any need for software configuration programs or jumpers. Ideally, auto-configuring devices should just "plug and play". Auto-configuration has been made common because of the low cost of microprocessors and other embedded controller devices. Configurations may be stored in NVRAM, loaded by a host processor, or negotiated at system initialization time. In some cases, hot pluggable devices may be able to renegotiate their configuration. Example of auto-configuring devices: USB Example of auto-configuring devices and protocols: DHCP Zeroconf

See also

Autoconfig, Amiga system for automatically setting up hardware peripherals FPGA Universal Plug and Play

References

Text derived from https://en.wikipedia.org/w/index.php?oldid=1353928114 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

1 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.