Lesson plan

Auto-configuration

Auto-configuration is the automatic configuration of devices without manual intervention, without any need for software configuration programs or jumpers. Ideally, auto-configuring devices should just "plug and play". Auto-configuration has been made common because of the low cost of microprocessors and other embedded controller devices. Configurations may be stored in NVRAM, loaded by a host processor, or negotiated at system initialization time. In some cases, hot pluggable devices may be able to renegotiate their configuration. Example of auto-configuring devices: * USB Example of auto-configuring devices and protocols: * DHCP * Zeroconf

Back to article

Article summary

Auto-configuration is the automatic configuration of devices without manual intervention, without any need for software configuration programs or jumpers. Ideally, auto-configuring devices should just "plug and play". Auto-configuration has been made common because of the low cost of microprocessors and other embedded controller devices. Configurations may be stored in NVRAM, loaded by a host processor, or negotiated at system initialization time. In some cases, hot pluggable devices may be able to renegotiate their configuration. Example of auto-configuring devices: * USB Example of auto-configuring devices and protocols: * DHCP * Zeroconf

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.