Lesson plan

Biotransducer

A biotransducer is the recognition-transduction component of a biosensor system. It consists of two intimately coupled parts: a bio-recognition layer and a physicochemical transducer, which act together to convert a biochemical signal to an electronic or optical signal. The bio-recognition layer typically contains an enzyme or another binding protein, such as an antibody. However, oligonucleotide sequences, sub-cellular fragments such as organelles (e.g. mitochondria) and receptor-carrying fragments (e.g. cell wall), single whole cells, small numbers of cells on synthetic scaffolds, or thin slices of animal or plant tissues may also comprise the bio-recognition layer. It gives the biosensor selectivity and specificity. The physicochemical transducer is typically in intimate and controlled contact with the recognition layer. As a result of the presence and biochemical action of the analyte (target of interest), a physicochemical change is produced within the biorecognition layer that is measured by the physicochemical transducer, producing a signal that is proportionate to the concentration of the analyte. The physicochemical transducer may be electrochemical, optical, electronic, gravimetric, pyroelectric, or piezoelectric. Based on the type of biotransducer, biosensors can be classified as shown to the right.

Back to article

Article summary

A biotransducer is the recognition-transduction component of a biosensor system. It consists of two intimately coupled parts: a bio-recognition layer and a physicochemical transducer, which act together to convert a biochemical signal to an electronic or optical signal. The bio-recognition layer typically contains an enzyme or another binding protein, such as an antibody. However, oligonucleotide sequences, sub-cellular fragments such as organelles (e.g. mitochondria) and receptor-carrying fragments (e.g. cell wall), single whole cells, small numbers of cells on synthetic scaffolds, or thin slices of animal or plant tissues may also comprise the bio-recognition layer. It gives the biosensor selectivity and specificity. The physicochemical transducer is typically in intimate and controlled contact with the recognition layer. As a result of the presence and biochemical action of the analyte (target of interest), a physicochemical change is produced within the biorecognition layer that is measured by the physicochemical transducer, producing a signal that is proportionate to the concentration of the analyte. The physicochemical transducer may be electrochemical, optical, electronic, gravimetric, pyroelectric, or piezoelectric. Based on the type of biotransducer, biosensors can be classified as shown to the right.

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.